Design and Modelling of a Leaf Spring using 3D Printing Technology
Journal Title: International Journal of Trend in Scientific Research and Development - Year 2020, Vol 4, Issue 2
Abstract
3D printing technology forms the basis of corporation's prototyping process. 3D printing technology creates 3D physical protypes by solidifying layers of deposited power by using a liquid binder. 3D printing is an versatile process accommodating geometry of varying complexity in hundreds of different applications, and supporting many types of materials. By eliminating production steps and using substantially less material, additive process could be able to reduce waste and save more than 50 of energy compared to today's subtractive manufacturing process and reduce material cost upto 90 . The use of additive manufacturing can potentially benefit a wide range of industries including defence, aerospace, automotive, biomedical, consumer products and metal manufacturing. A leaf spring is a simple form of spring, normally used for the suspension in wheeled cars. Leaf springs are long and narrow plates attached to the body of a trailer that rests above or under trailer's axle. For safe and cozy using, to prevent the street shocks from being transmitted to the car components and to guard the guard the occupants from the road shocks it's miles important to determine the maximum safe strain and deflection. The objective is to find the stresses and deformation in the leaf spring via making use of static load on it. One of a kind of special materials with mechanical properties are taken into consideration for the structural static evaluation. All leaf spring has linear characteristics there is a linear dependence between force and deflection this means that the 3D printed springs could be used as machine elements in different applications. B. Shushma | Ch. Pavan | D. Vikas Reddy | G. Venu Madhav | A. Mukhul Vamshi ""Design and Modelling of a Leaf Spring using 3D Printing Technology"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29589.pdf Paper Url : https://www.ijtsrd.com/engineering/mechanical-engineering/29589/design-and-modelling-of-a-leaf-spring-using-3d-printing-technology/b-shushma
Authors and Affiliations
B. Shushma | Ch. Pavan | D. Vikas Reddy | G. Venu Madhav | A. Mukhul Vamshi
Keywords
Related Articles
- EP ID EP685883
- DOI -
- Views 104
- Downloads 0
Ethical Hacking
Today's security is that the main downside and every one the work is finished over the net mistreatment knowledge. whereas the information is out there, there square measure many varieties of users who act with knowledge...
Sway of Resources Overrun with Risk Mitigation in Hills Construction
In development industry danger plays a crucial role, each and every work is related with some chance factors. Especially in hilly construction tasks there are more than a few danger elements involved. The chance of dange...
Food Safety Control Using Hyperspectral Imaging
Food safety and control is a great concern for the food industry, food-borne illnesses are burden on the public health, and can lead to the disturbance to the socity. This paper involves different types of hyperspectral...
Determination of Rate of Shell Accretion in Pesticide Induced Fresh Water Bivalve, Parreysia Corrugata
Rate of shell accretion was studied in the freshwater bivalve, Parreysia corrugata exposed to chronic treatment of pesticides; quinalphos (0.108 ppm) and thiodan (0.0708 ppm). The thickness of the accreted part was maxim...
A Study on Portfolio Management
Portfolio Management is a very generic term used to refer to the management of different assets. In the financial markets, there are many assets available, such as stocks, bonds, and Treasury bill, commodities, currencie...