Design and Simulation of a Dual-Band Filtering Power Divider Using Stepped Impedance Resonators and present a novel method for generation of transmission zeros
Journal Title: روش های هوشمند در صنعت برق - Year 2017, Vol 8, Issue 31
Abstract
In this article, a compact power divider with dual-band frequency response, designed and simulated using dual-mode stepped impedance resonators (SIRs) for WLAN application. The resonant frequencies of the proposed stepped impedance resonator are investigated using even- and odd-mode analysis for frequency of 2.4 GHz and 5.2 GHz. A new method is presented for feeding the stepped impedance resonators that using the wave cancellation theory to create transmission zeros near the pass bands. Finally, four transmission zeros are generated around the both pass bands to improve the selectivity and out of band isolation. To reducing the circuit size and possibility of the feeding method implementation, two spiral stepped impedance resonators are used to design the filtering power divider. the designed power divider is simulated by HFSS software. The proposed filtering power divider has a miniature size (0.14 λg × 0.15 λg), good isolation between the output ports as well as appropriate operation at the pass bands.
Authors and Affiliations
Mojtaba Mirzaei, Mohammad Amin Honarvar
Keywords
Related Articles
- EP ID EP317676
- DOI -
- Views 84
- Downloads 0
Design and Simulation of a New Optimized Full-Adder Using Carbon Nano Tube Technology
The full adder circuit is one of the most significant and prominent fundamental parts in digital processors and integrated circuits since it can be used for implementing all four basic computational functions including:...
Wavelet Packet Entropy in Speaker-Independent Emotional State Detection from Speech Signal
In this paper, wavelet packet entropy is proposed for speaker-independent emotion detection from speech. After pre-processing, wavelet packet decomposition using wavelet type db3 at level 4 is calculated and Shannon entr...
A New Approach in Designing Multi-Layer Frequency Selective Surfaces based on Tuning Pole-Zeros of Individual Layers
In this paper, a new approach (not new technique) is introduced for designing frequency selective surfaces (FSSs). We try to compose the desired frequency response using the frequency response of each constituent FSS. Al...
Improving Performance of Total Harmonic Distortion Based Fault Detection Scheme for Inverter Interfaced Islanded Microgrids
Global warming and environmental concerns have led to increasing penetration of converter interfaced renewable energy resources. One of the main challenges of inverter interfaced islanded microgrids is the fault detectio...
Design and Implementation of an Optimal PV Refrigeration System in the Smart Grid Considering Multi-objective Optimization
Today, optimization in power systems is an unavoidable necessity. Energy intensity reduction in electrical devices and enhancement of their efficiency and performance, electricity loss reduction and voltage profile impro...