Design and Simulation of Spot Welding Process
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
The presented work confirmed that the use of resistance spot welding process in industry can be considered as one of the widely processes applied for sheet joining purposes. Finite element modelling technique is an efficient tool which can be effectively and efficiently applied to describe the welding process. The effect of electrode geometry on current distribution has been investigated. A model of thermo-mechanical- electrical coupling with two dimensional axisymmetric is created to explain the process of weld. The modelling is completed to run the electrode lifetime and present distribution in the electrode face. Both thermal-electrical and mechanical evaluation is made to create version. During simulation, background of temperature and procedure distributions had been called. Development of weld nugget through procedure and impact of process parameters on nugget formation have been researched. Good agreement of uniform current distribution is extracted from the computational investigation, which allows including the benefits of design and simulation of processing weld related to production performance and cost.
Authors and Affiliations
Ziad Sh. Al Sarraf
Keywords
Related Articles
- EP ID EP657092
- DOI 10.24247/ijmperdaug2019142
- Views 105
- Downloads 0
Analysis of the Influence of Friction Stir Processing on Gas Tungsten Arc Welding of 2024 Aluminum Alloy Weld Zone
Gas tungsten arc welding is the most commonly used process for joining of AA 2024 alloys, which are highly demanded in aircraft structural applications. The quality of the welds and strength of the welded joints achieved...
Experimental Investigation of S - Type Load Cell in Steel En24 and Aluminium 7075
S type load cell is used currently in Automobile industry, S type load cell is designed in CATIA V5 and strain analysis is analyzsed by software ANSYS 14.5. S type load cell is designed first with the dimensions analyzse...
An Analysis of Mode-I Fracture in Carbon-Epoxy Laminate for the Prediction of Critical Loads and Crack Lengths
Present work deals with the analysis of a four layered symmetric angle-ply CFRP laminate for the prediction of critical load for an existing crack and critical crack length at an existing load that causes mode-I fracture...
COMPARISION OF LIFITING RE-ENTRY AND BALLISITC RE-ENTRY
This paper highlights comparison of lifting re-entry and ballistic re-entry. 3-D. O. F code is developed and used for comparing the different re-entries. The main objective of this paper is to minimize deceleration on re...
Raw Material Captcha Security, Applied Through Zopfia Technique
In the manufacturing unit, production plays the important role. Requirement analysis, procuring materials from the third party vendors, quality checking towards the product and storage are the main integral segments, in...