Design, Construction and Evaluation of a Row Crop Thinning Machine
Journal Title: Journal of Agricultural Machinery - Year 2014, Vol 4, Issue 1
Abstract
Equipment availability is necessary in the development of Agriculture mechanization. Crop thinning is one of the most important stages in row crop production which is laborious and costly. The objective of this project is design and construction of a row crop thinning machine. Four main system units are plant sensors, ground sensors, control and thinning platforms. In this machine the unwanted plants on the rows are randomly removed by employing a pneumatically system. A blade on a vertical arm with pendulum motion removes the plant from the rows. The machine control system consists of an arm and a blade which is activated by a double acting cylinder and equipped with a relay and a timer. The pneumatic cylinder is controlled via a solenoid valve. Laboratory tests were conducted to validate the machine performance. Some other preliminary tests also were performed for optimization of parameters such as cinematic index and cutting length of blades. The laboratory tests (totally 9 tests) were performed with a constant forward speed and three levels of plant density, using artificial plants. The data were analyzed using SPSS software. The results show that satisfactory performance of the machine is achieved when the plant density is moderate i.e. the thinning performance reduces with higher plant distance in the row. The other effective variable on machine performance is the adjustment of sensor sensitivity, which is used to distinguish between week and strong plants. In general the machine performance is sensitive to plant shape and morphology, plant distribution pattern in the field, growing stage of the plants, time of thinning and the effectiveness of previous weeding operations
Authors and Affiliations
M. Gol Mohammadi,Sh. Abdollahpour,A. Mahmoudi,S. H. Fattahi,
Keywords
Related Articles
- EP ID EP717699
- DOI -
- Views 31
- Downloads 0
Design, Construction and Test of a Three-point Hitch Dynamometer
For measuring the draft forces exerted by implements into tractor, we use the dynamometers that are divided into pull type or three-point hitch type. For measuring the forces between the tractor and the mounted implement...
Modeling and Optimization of Wing Geometry Effect on Draft and Vertical Forces of Winged Chisel Plow
Introduction The dynamic response of soil on tillage tools, is an important factor in determining their performance. For a tractor with a certain size, a reduction in draft force, the working width and speed of tools can...
Evaluation of Vegetation Index of Greenhouse Tomato and Cucumber using non-destructive Sensors
Introduction One of the most important factors in agricultural production is nitrogen which has a great impact on plant growing, yield performance and plant quality production. The optimum amount of nitrogen fertilizer i...
Performance Evaluation of the UAV Sprayer in Controlling Brevicoryne Brassicae L. Pest in Canola
IntroductionAbout 30% of the annual losses of agricultural products are caused by pests, diseases, and weeds. Spraying is currently the most common method of their control. At present, various manual and tractor-mounted...
Prioritizing the Power Arrival in Khuzestan Province Agriculture using FAHP and FTOPSIS
Introduction Understanding the status of tractor power in any region is a key factor in setting a mechanization planning to improve the capacity of mechanized operations. For this reason, it is necessary that the availab...