Design Improvement Study For cBN Coated Cutting Body Used In Piston Ring Cutting Process
Journal Title: American journal of Engineering Research - Year 2018, Vol 7, Issue 2
Abstract
In this study, the quality of non-alloy, non-heat treated, gray cast iron workpieces with lamellar graphite was compared with the cutter body with cubic boron nitride (cBN) coated with different hot work steel tool designs.As an alternative to the current single piece cutter body design, a multi-piece modular cutter body has been designed and used.Cutting process is done with INDEX brand automatic CNC cutting machine. Cutting heights and parallelism of the produced samples were measured with GOETZE special design ring height measuring device and surface roughnesses were measured with MAHR brand MARSURF XR1 model surface roughness meter.It has been found that two different body designs also produce similar results on product quality.No significant difference was observed between the ring height, parallelismand surface roughness values.This result shows that the newly designed multi-piece modular cutter body can be used while maintaining the current product quality.In this way, by using the multi-piece modular cutter body, it will be able to reduce setup time, cutter tool scrap rates and cut off all product dimensions with minimum stock level.
Authors and Affiliations
Varan Güneş, Nejat Yıldırım Sarı
Keywords
Related Articles
- EP ID EP396460
- DOI -
- Views 51
- Downloads 0
Intelligent Automated Guided Vehicle using Visual Servoing
.
Low Cost Removable (Plug-In) Electronic Password - Based Door Lock
Security has always been an important factor in life. We need our home and offices to be secure. In this paper the plug-in electronic door lock is designed to have two levels of security and it comprises two sections. Th...
Prospects of TVET for Ghana’s Industrial Development
In Ghana the dissemination and use of Technical and Vocational knowledge in industry have a great importance for both national and international competitiveness. In the developed countries, improving the job skills of th...
Characterization of Moganite Obtained From Natural Zeolite By Ball Milling
The aim of this study is to investigate the effect of mechanical activation on the phase change of the zeolite composition of the Hekimhan region which is located in the northern of the Malatya Basin in Eastern Anatolia....
Comparison between the Performance of GA and PSO in Structural Optimization Problems
Genetic Algorithms and Particle Swarm Optimization are two of the most popular heuristic optimization techniques. They belong to the same group of population-based methods and are often regarded as competitors. While the...