DESIGN METHOD OF DUAL-FREQUENCY MICROWAVE PHASE SHIFTERS WITH DISTINCT PHASE SHIFTS IN FREQUENCY BANDS
Journal Title: Вісник Національного університету "Львівська політехніка", серія "Радіоелектроніка та телекомунікації" - Year 2016, Vol 849, Issue 2016
Abstract
This paper is devoted to design method of dual-band phase shifters, which can execute the assigned to them functions in operating bands for example of two different telecommunication standards. In the circuit of phase shifter, where the differential phase shift is provided by the switching of channels of passing the signal the parameters of switching elements do not determine this shift unlike the other well-known circuits. However in case of bad matching and isolation of switches the frequency bands are narrowed, the losses and imbalance of amplitudes in two states are grown. The dual-frequency matching and isolation are reached in the SPMT switch by means of impedance transformers which can be located on the input of switch before branching, or in channels after the switching elements before outputs. The methods of calculation of such dual-frequency transformers based on the asymmetrical one-stub circuit and the symmetrical two-stub circuit, and also the methods of calculation of circuits which are needed for realization of reactance with the appropriate values at two operating frequencies is offered. The calculation and simulation of the SPDT switch for use as a part of the phase shifter with operating frequencies of 2,4/5,2 GHz was executed by these methods. For obtaining of arbitrary difference phase shift at two frequencies the replacement of line segments in channels of phase shifter by the dual-frequency equivalent circuits is carried out. The method of calculation of such P-type circuit for replacement of a segment with different values of characteristic impedance and electrical length at operating136 frequencies is offered. The offered approach was investigated on examples of calculation and simulation of the dual-frequency phase shifters with identical 450/450 and distinct 450/900 differential phase shifts at operating frequencies 2,4/5,2 GHz and with shifts 450/–450 at frequencies 0,95/2,15 GHz.
Authors and Affiliations
Ivan Prudyus, Valeriy Oborzhytskyy, Volodymyr Storozh
Keywords
Related Articles
- EP ID EP457187
- DOI -
- Views 102
- Downloads 0
EVALUATION OF NETWORK PARAMETERS AT THE STAGE OF OPTICAL TRANSPORT SYSTEM DESIGNING
Since the primary network is nothing more than a set of channels, behavior and standards do not go beyond the network layer protocols, which includes a description of channels and methods of switching. Emerging of new so...
RESEARCH OF WIDTH OF WORKING SECTOR OF DIRECT DIGITAL CORRELATIVE-INTERFEROMETRIC DIRECTION FINDER WITH RECONSTRUCTION OF SPATIAL ANALYTICAL SIGNAL
It was conducted the research of the width of the working sector and the exactness of direct digital correlative-interferometric direction finder that uses reconstruction of spatial analytical signal. It is shown that th...
SUBPIXEL IMAGE PROCESSING IN MONITORING SYSTEMS OF VISIBLE WAVELENGTHS
This paper is devoted to considering of ways to improve the resolution, principles and methods of subpixel imaging technology, assessment of the development status and the latest research developments. Modern approaches...
CHANNEL SELECTION ALGORITHMS PERFORMANCE EVALUATION FOR SPECTRUM DECISION IN COGNITIVE RADIO
Different spectrum decision methods in a Cognitive radio network were analyzed in this paper. The technology of Cognitive Radio networks needs to make a decision which spectrum band is the best among the available free b...
OPTIMIZATION OF TOPOLOGY TRANSMISSION NETWORK MOBILE COMMUNICATION WITH TAKING INTO ACCOUNT CONFLICTING QUALITY PARAMETERS
To meet the put forward contradictory technical and economic demands to the structure of transmission networks it is necessary to use multi-criteria optimization methods when planning them. During our planning of a trans...