Design, Modification and Analysis of Shaft of Concrete Mixer Machine

Abstract

In this project Design, Modification and Analysis of shaft of concrete mixer machine has done. Shaft is an important equipment of concrete mixer machine use for concrete mixture preparation and for support a revolving drum. The main objective of this analysis is to optimize the design of concrete mixer machine. The existing shaft of concrete mixer machine gets failed after approximately 150 Hr of uses. To analyse this shaft using FEM, firstly a proper CAD model is developed using Pro/E cad software. Then by using ANSYs software FEM analysis is done to determine the different types of stresses and deflection developed. After carried out the analysis it has been found out that the existing design of shaft of concrete mixer machine is not proper and therefor I had suggested to change the material of the shaft for efficient working and to withstand the different static and dynamic load.

Authors and Affiliations

Amruta K. Wankhede, Dr. A. R. Sahu, Prof. U. D. Gulhane

Keywords

Related Articles

Simulation based performance of AODV (Reactive) and DSDV (Proactive) routing protocol for MANET

Mobile Ad hoc network which runs on battery power and is the major source of entire nodes, the entire network and network lifetime [14] is dependent on that battery power, if any of the node present in the network runs...

Partially Replacement of Cement by Bagasse Ash

In this report recycle of bagasse ash as a cement replacement in concrete. This gives a satisfactory solution to environmental concerns associated with waste management. The results of that bagasse ash is an effective m...

Bubble Deck

This paper proposes an approach for creating biaxial slabs using bubble deck. This approach avoids the limitations in hollow core slabs, lack of structural integrity, inflexibility and lack of architectural possibilitie...

AAN Based Hybrid Active Power Filter for Power Quality Improvement

The Active filtering of electric power has now turned into a develop innovation for consonant and receptive power pay in two-wire (single stage), three-wire (three stage without nonpartisan), and four-wire (three stage...

Home Automation Using Remote Control System

This paper provides remote controlling and automation for homes and offices. These are very essential in present life style. Wireless control is primary concern for everyone. This paper describes a design of effective r...

Download PDF file
  • EP ID EP22898
  • DOI -
  • Views 307
  • Downloads 7

How To Cite

Amruta K. Wankhede, Dr. A. R. Sahu, Prof. U. D. Gulhane (2016). Design, Modification and Analysis of Shaft of Concrete Mixer Machine. International Journal for Research in Applied Science and Engineering Technology (IJRASET), 4(12), -. https://europub.co.uk/articles/-A-22898