Design of a set of nonlinear control systems of the arc PVD ionplasma installation
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 2, Issue 2
Abstract
<p class="a">Control systems over the set of technological processes of the installation for ion-plasma application of coatings on metal cutting tools are developed. The purpose of the development is the need to improve the quality and durability of manufactured tools by maintaining more accurate technological parameters of the installation. The result of our research is the developed new nonlinear models of control systems over all stages of operation. At the stage of ionic cleaning, a temperature rise in tool is maintained in line with the set linear program by enabling and disabling the arc discharge. Control system provides for a deviation from the program by ±4.5 K, which is 4 times less than the standard value. At the stage of applying a coating on the tool, the temperature is precisely stabilized in a vacuum chamber by a continuous change in voltage at the substrate, as well as pressure in it by a change in the flow rate of nitrogen into the chamber. Under the action of maximal disturbances, a deviation in pressure, 0.037 Pa, and in temperature, 0.45 K, is ensured. At the stage of cooling, a decrease in temperature is achieved in line with the program by changing the feed of nitrogen into the chamber. Under the action of maximal disturbances, a maximum cooling rate of 0.22 K/s is ensured, which is also better than the standard value. Thus, the application of the developed control systems allowed us to considerably improve tool resistance compared to the installations that are used at present. It is important that the developed control systems are easy to implement and make it possible to ensure high quality of the obtained tools.</p>
Authors and Affiliations
Kateryna Kyrkopulo, Vladimir Tonkonogyi, Oleksii Stopakevych, Andrii Stopakevych
Keywords
Related Articles
- EP ID EP527856
- DOI 10.15587/1729-4061.2018.127708
- Views 55
- Downloads 0
Obtaining, studying the properties, and application of zirconium(IV) oxymethanesulfonate
<p>The author has investigated the process to obtain zirconium (IV) oxymethanesulfonate via the interaction between methane sulfonic acid (CH<sub>3</sub>SO<sub>3</sub>H) (MSA) and zirconium (IV) oxocarbonate (ZrOCO<sub>3...
An experimental study of the effect of nanoparticle additives to the refrigerant r141b on the pool boiling process
<p>The results of the experimental study of the internal characteristics of the pool boiling process of the refrigerant R141b, solution R141b/surfactant Span-80 and nanofluid R141b/Span-80/ TiO<sub>2</sub> nanoparticles...
Development of thermal installation on the basis of the cascade heat pump for ensuring all thermal and refrigerating needs of the consumer
<p>This article describes the developed and manufactured multifunctional heat point, which allows to supply heat and refrigeration energy to consumers. For effective operation, the heat point contains an automated contro...
A study of initial stages for formation of carbon condensates on copper
<p>In the CVD method, samples of carbon condensates were obtained under special conditions (low substrate temperature and short growth times). The use of special technological conditions makes it possible to study the in...
Research of the impact of the method of heating of heat units on the qualitative characteristics of treated materials
<p>An analytical method for calculating the chemical potentials of the components of the gas-solid system based on thermodynamic calculations of carbon potentials of the С–О–Н–N gas mixture (combustion products of the me...