Design of Automobile Concrete Pump
Journal Title: IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) - Year 2018, Vol 15, Issue 3
Abstract
This paper has been written with the following objective; “design an automobile concrete pump uses hydraulic power to transport the concrete with high efficiency and safely”. To reduce the accidents and increasing the construction efficiency related to time this machine should be the preferable to use. The hydraulic force from a prime mover is used to push the mixed concrete in a metallic pipe. This concrete pump performs to maximum height of 85m. After studying the currently available concrete pumps, three working conditions were chosen; a maximum working pressure of 74 bars, flow rate of 150 m3/ h and a load of 145040 N. The final wall thickness was, however, reached after considering the thickness of available hydraulic cylinders working under similar conditions. The thickness of cylinder was obtained to be 5 mm; with maximum working speed of 0.78 m/s and discharge of 150m3/h; similar design procedures were followed in designing the cylinder piston rod, which is 50 mm diameter and 800 mm length of hydraulic and concrete cylinder. With this simple and quick machine the time saving and quality construction structures will be done.
Authors and Affiliations
Mr. Turabimana Pacifique
Keywords
Related Articles
- EP ID EP437937
- DOI 10.9790/1684-1503040105.
- Views 66
- Downloads 0
Static Model And Analysis of Micro Gas Turbine Using Autodesk Inventor And Autodesk Nastran Software
In this project development of Micro gas turbine with three different materials are tested and designed using Autodesk inventor and Autodesk nestron software. Generally micro gas turbine is a size so they are compactable...
Mechanical and Fracture Mechanics Properties of Ultra-HighPerformance Concrete
This paper presents the results of an experimental study conducted to develop and evaluate the compressive strength, flexural strength and drying shrinkagewhich are three important properties of ultra-highperformance con...
Nonlinear Analysis of the Effect of Horizontal Construction Joint on the Flexural Behavior of Reinforced Concrete Slabs
The Study of the behavior of slabs under the influence of horizontal construction joints has become necessity in the case of large thickness slabs such that raft and some special cases of flat slabs which were casted in...
Study of The Manufacture Ofdie-Cutting Part And The Mechanical Fractureof Die Block
The die processes, such as punching, bending and drawing are of unquestionable utility, as examples are the home appliances, automotive products, etc, these products have several parts produced with thestamping processes...
Analysis And Comparative Study for Photovoltaic Solar Cooling System Between Two Geographical Regions
Our basic motive is to regulate the operating power in solar cooling system. This project presents the results of an experimental investigation carried out to minimize the power consumption of a solar cooling running at...