Design of Blackboard Duster Cleaning Machine
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 5
Abstract
These days, teachers are getting affected by respiratory diseases and skin allergies because using a chalk for long duration. Continuous use of chalk dust also affects vision of a human being. As dust contains tiny particulates of chalk, they tend to accumulate in human respiratory system, which can create severe health issues. Traditionally, chalk dusters are being cleaned by beating the on floor, wall or hitting dusters together which triggers above problems and causes environmental pollution. Hence, it is necessary to design the machine, which will clean chalkboard dusters and achieve dust free environment in classrooms and laboratories. Design of a duster cleaning machine is presented in this paper.
Authors and Affiliations
S. M Jagtap, S. B. Tuljapure
Keywords
Related Articles
- EP ID EP672267
- DOI 10.24247/ijmperdoct201976
- Views 95
- Downloads 0
Heat Transfer Characteristics for A Fin Exposed to Fully Wet Air
A numerical method for two types of longitudinal tapered fins exposed to fully wet air conditions have been studied using grid generation methods. The study included the effect of relative humidity on the temperature dis...
Experimental Investigation of Twisted Tape Insert in a Double Pipe Heat Exchanger using Aluminium Oxide Nanofluid
This document reports on the experimental investigation of the features of the heat transfer performance of heat exchanging device with tape insert. The experimental investigation was carried out pipe a warped tape inser...
Study the Effects of Carbon Nano Tubes on Corrosion Behavior of Ni-Pelectro-Less Coating of Low Alloy Steels in Salt Water
The basic aim is to study the resistance of corrosion and hardness of heat treatment of coatings with electro-less NiP-CNT. Various concentration of CNTs ranging, 0, 0.1, 0.2 and 0.4g/L in Ni-P-CNT composite was deposite...
An Experimental Investigation on Glass /CarbonFibre Hybrid Composite Material
The primary target of this work is to study the three samples of glass fibre /carbon fibre strengthened with three distinctive proportion layers with epoxy pitch. The soundness of samples tested by using non-destructive...
Optimization of Wire-Cut EDM Process Parameters for SS304 Using Design of Experiment
Wire-Cut Electrical Discharge Machining (WEDM) is a non-customary machining process that included a transient start releases through the liquid because of the potential contrast between the cathode and the workpiece....