Design of Broadband Metamaterial-Based Ferromagnetic Absorber
Journal Title: Materials Science: Advanced Composite Materials - Year 2018, Vol 2, Issue 2
Abstract
In this paper, a metamaterial-based ferromagnetic absorber has been designed at microwave frequencies. The proposed absorber is composed of a periodic array of stacked circular ferromagnetic patches fabricated on the FR4 substrate. With the ferromagnetic property, the single-layer patch array generates a good resonant absorption mode. By stacking multiple ferromagnetic patches, the designed absorber with the absorption above 90% has a wide absorption bandwidth from 10 to 21 GHz. Due to the symmetric structure, the proposed absorber is polarization insensitive. At oblique incident with the incident angle of 45o, the good absorption more than 80% can be achieved in the whole operation band.
Authors and Affiliations
Yan Shi, Jie Yang, Hua Shen, Zhankui Meng, Tong Hao
Keywords
Related Articles
- EP ID EP679023
- DOI -
- Views 202
- Downloads 0
Short beam strength and flexural behavior of GFRP laminates embedded with short carbon fibers having notch
This paper examines the mechanical performance of eight-layered GFRP laminate embedded with short carbon fibers (SCF). Eight layered GFRP samples are prepared using press molding machine at 40 KN pressure. Notched sample...
Advanced composite materials manufacturing technology
In recent years, a variety of composite materials preparation technology has been updated, from ceramic matrix composites, metal matrix composites to polymer matrix composites, a variety of preparation techniques have be...
Carbon Fiber Reinforced Epoxy Resin Matrix Composites
Carbon fi ber reinforced polymer matrix composites have been the focus of research. As the most widely used epoxy resin in all matrix materials, it is also the most studied. In this paper, the modification of TDE-85 epox...
The structure and properties of laser seam stepper system (LSS) welded the low alloy high strength steel DOCOL 1200M with martensitic structure
This paper will present the influence of joining process parameters on the structure and properties of overlapped welded joints of 1.8 mm DOCOL 1200M steel. The obtained welded joints were subjected to micro- and macrosc...
Investigation of the mechanical and physical properties of PLA produced by injection molding for matrix material of polymer composites
Polymer materials are increasingly being used due to their superior properties such as light weight, low cost and corrosion resistance. The difficult destruction of highly advantageous polymers in the environment leads t...