Design of Circular Microstrip Patch Planar Antenna with Different Ground Planes for UWB Application
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2017, Vol 5, Issue 6
Abstract
the aim of this paper is to design and simulate the microstrip patch antenna which covers the ultra wide band 3.1 to 10.6 ghz. This paper covers study of basics and fundamentals of microstrip patch antenna. The antenna is fabricated using an h=1.6mm thick fr4 substrate (εr=4.4), which occupies a coverage area of 26.6 ws x 29.3 ls mm2.this is a simulation based study. The design and simulation of the antenna is carried out using cst microwave studio simulation software. This design is extended circular planar microstrip patch antenna that uses defected ground plane which covers the entire uwb range. Return loss curve, vswr and the far field results are shown for designed antenna. The proposed antenna has return loss of -37 db at 8ghz. The return loss of antenna with rectangular ground plane is also suitable in 3-11 ghz range that covers the uwb range.
Authors and Affiliations
B Babu Rao, Smt. T. Suneetha
Keywords
Related Articles
- EP ID EP24712
- DOI -
- Views 430
- Downloads 13
A Review Paper on Performance of SCC Containing Lime Stone Powder and Quarry Dust
Self-Compacting Concrete (SCC) is highly flow able, stable concrete that can spread readily into place and fill the formwork without any consolidation and without undergoing any significant segregation. In recent years,...
Analysing the Effect of Unified Power Flow Controller on Power System Performance
The objective of the planning and operation of an electric power system is to satisfy the system load and energy requirement as economically as possible. Therefore, the system planner has to consider a variety of option...
Anaerobic digestion of Municipal Solid biodegradable wastes for methane production:A Review
The untreated and undisposed municipal solid waste generated through different sources is a major concern of the world now-a-days. There are millions of tonnes of municipal solid waste produced every year and the amount...
Finite Element Analysis of Bond Behaviour Between Concrete and Steel Reinforcing Bar by Pull Out
Bond strength is very important in reinforced concrete and it is necessary to create suitable bond between steel and surrounding concrete. Bond strength is the means by which load is transferred between steel and concre...
Experimental Study on High Strength Concrete Using Industrial Wastes
Generally the river sand is used as a fine aggregate on concrete and is obtained by mining the sand from river bed. Increased sand mining not only affects the aquifer of the river bed but also causes environmental probl...