DESIGN OF FLYING SHEAR DEVICE AND ALGORITHM BASED ON MOTION CONTROL SYSTEM
Journal Title: Topics in Chemical & Material Engineering (TCME) - Year 2018, Vol 1, Issue 1
Abstract
The flying shear device and algorithm design using the SIEMENS S7-300 series PLC SINAMIC SI20 motion controller and the motion control system based on the realization of the servo motor with high precision and high stability control are no traction test data under the condition of Kun and disc cutter by inertia compensation and the control algorithm of PID system, analysis of the causes of the control process and material tension linear velocity error analysis. The system analysis and algorithm design can be used for reference in industrial flying shear and motion control design.
Authors and Affiliations
Liu Qi, Li Shuo, Wang Ying, Liang Kai, Mo Huili
Keywords
Related Articles
- EP ID EP414783
- DOI 10.26480/icnmim.01.2018.257.259
- Views 86
- Downloads 0
PREPARATION AND CHARACTERIZATION OF SIDE CHAIN EPOXY MODIFIED SILICONE OIL FOR PRECURSOR FIBER OF CARBON FIBER
In the carbon fiber production process, the oil agent is a very important part that affects the quality of the carbon fiber, and the epoxy group can improve the heat resistance of the silicone oil, so the epoxy modified...
SIMULATION OF PRESSURE-SWING DISTILLATION FOR SEPARATION OF ETHYLENE GLYCOL AND 1,2-BUTANDIOL
A pressure-swing distillation process for separation of ethylene glycol and 1,2-butandiol is proposed on the basis of characteristic analysis on the ethylene glycol-1,2-butandiol azeotropic system. Simulation is performe...
A STUDY FOR COMPOUND RARE EARTH CHEMICAL TREATMENT LIQUID BASED ON BRASS SURFACE
In this paper, the optimum technological conditions of brass composite rare earth chemical treatment liquid were obtained by orthogonal test. The process conditions for chemical degreasing, chemical polishing and picklin...
STRUCTURAL DESIGN OF BIOMASS CONTINUOUS FERMENTATION SYSTEM
A continuous biomass fermentation system, in particular an anaerobic continuous fermentation system with agricultural straw as a carbon source. After the culture medium and biomass material storage tank configuration is...
PURIFICATION OF ANTHOCYANINS FROM FRUIT OF ARONI AMELANOCARPA
Five different macroporous resins were evaluated for the adsorption properties of the anthocyanins extracted from the Aroni amelanocarpa fruit. The effects of initial anthocyanin concentration, amount of elution solvent,...