Design of Multistoried R.C.C. Buildings with and without Shear Walls
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 7
Abstract
From the past records of earthquake, there is increase in the demand of earthquake resisting building which can be fulfilled by providing the shear wall systems in the buildings. Static Analysis is performed for regular buildings up to 90m height in zone II and III, Dynamic Analysis should be performed for regular buildings in zone IV and V above 40 m. Reinforced cement concrete (RCC) framed structures combined with shear walls has been widely used to resist lateral forces during earthquakes in tall buildings. Shear walls are generally provided for full height of the frame. Shear wall systems are one of the most commonly used lateral-load resisting systems in high-rise buildings. Shear walls have very high in-plane stiffness and strength, which can be used to simultaneously resist large horizontal loads and support gravity loads, making them quite advantageous in many structural engineering applications. An earthquake load is applied to a building for G+12, G+25, G+38 located in zone II, zone III, zone IV and zone V for different cases of shear wall position. An analysis is performed using ETAB v 9.0.7 software. Lateral displacement and story drift are calculated in all the cases. It was observed that Multistoried R.C.C. Buildings with shear wall is economical as compared to without shear wall.
Authors and Affiliations
M. S. Aainawala 1 ,
Finite Element Analsis of a Diesel Engine Connecting Rod
The connecting rod forms an integral part of an internal combustion engine. It acts as a linkage between piston and crank shaft. The main function of connecting rod is to transmit the translational motion of pisto...
An Experimental Investigation of Effect of Cutting Fluids on Chip Formation and Cycle Time in Turning of EN-24 and EN-31 Material
In metal cutting industries it is essential to study the chip morphology during machining process. The chip formation is not only depending upon the work piece material but even on the cutting fluids and grain str...
DUE PROCESS IN THE PROCUREMENT SYSTEM: THE NIGERIA EXPERIENCE
With the upsurge in fraudulent activities in financial accounting and corrupt practices in the global economy especially Nigeria, due process in the procurement system has become an emerging topic of great importance fo...
PERFORMANCE ENHANCEMENT OF DUAL POLARIZATION COHERENT OPTICAL SYSTEMS WITH AND WITHOUT INLINE DISPERSION COMPENSATION
We study and compare the performance of 112Gb/s Dual polarization coherent optical system for single channel coherent system with different modulation techniques,DP- QPSK(Dual Polarization Quadrature phase shift...
DEVELOPMENT OF COMPUTERIZED ELECTRONIC COUNTER AND TIMER USING LCD MONITOR IN NAVAL STATE UNIVERSITY
The main objective of this study was to develop a computerized electronic counter and timer using LCD monitor to be used in cashier’s office of Naval State University, Naval, Biliran, Philippines. This study u...