Design of power system stabilizer for damping power system oscillations
Journal Title: IOSR Journals (IOSR Journal of Electrical and Electronics Engineering) - Year 2017, Vol 12, Issue 1
Abstract
The problem of the poorly damped low-frequency (electro-mechanical) oscillations of power systems has been a matter of concern to power engineers for a long time, because they limit power transfers in transmission lines and induce stress in the mechanical shaft of machines. Due to small disturbances, power systems experience these poorly damped low-frequency oscillations. The dynamic stability of power systems are also affected by these low frequency oscillations. With proper design of Power System Stabilizer (PSS), these oscillations can be well damped and hence the system stability is enhanced. The basic functions of the PSS is to add a stabilizing signal that compensates the oscillations of the voltage error of the excitation system during the dynamic/transient state, and to provide a damping component when it’s on phase with rotor speed deviation of machine. Studies have shown that PSS are designed to provide additional damping torque, for different operation point normal load, heavy load and leading to improve power system dynamic stability.
Authors and Affiliations
Ahmed Mohammed. Ishag, Eisa B. M. Tayeb
Keywords
Related Articles
- EP ID EP388997
- DOI 10.9790/1676-1201011217.
- Views 142
- Downloads 0
Design & Implementation of Fuzzy Parallel Distributed Compensation Controller for Magnetic Levitation System
This study applies technique parallel distributed compensation (PDC) for position control of a Magnetic levitation system. PDC method is based on nonlinear Takagi-Sugeno (T-S) fuzzy model. It is shown that this technique...
Impact of Distributed Generation from Solar Energy on Power System Distribution in Nigeria
Distributed generation (DG) are electrical power generations designed at the customer load site. They have the ability to reduce technical losses, improve voltage profile and power quality. When adequately installed, it...
Improve Recovery Algorithm of MWC sy
Multiband signal is a typical signal in the realm of modern communications, whose spectrum is the sum of several narrow band signals in frequency domain. Modulated Wideband Converter (MWC) system, which is based on the e...
DC To DC Boost Converter with High Voltage Gain
the main objective of this work is to produce a very high DC output voltage from a small input voltage. The input voltage range is from 4 to 6 DC voltages and the output voltage is 810 V with no load. Depending upon the...
A Solar-Photovoltaic Grid Interface Systemusing Smc Based On Lyapunov Function
A sliding mode control technique (SMC) is used for achieving maximum power point tracking (MPPT) control of solar-PV array. The Lyapunov function-based control technique is designed and developed for the DC-AC inverter t...