Design of the laboratory bench for a hydrovolumetric-mechanical transmission of the tracked tractor
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 2, Issue 7
Abstract
<p>Double-flow hydrovolumetric mechanical transmissions is an advanced technical solution that aims to increase productivity, improve efficiency and convenience of control over wheeled and tracked tractors. Their arrangement renders considerable potential for their modernization and makes it possible to introduce recuperation systems that would enhance their performance efficiency coefficient to the level of mechanical transmissions. Innovativeness of these transmissions and the lack of a sufficient number of prototypes largely hinder their implementation in production.</p><p>A large number of possible HT circuits necessitates the creation of an original bench-prototype for each of them. In order to solve this task, we proposed in this paper a kinematic circuit of the universal testing laboratory bench for HT of the tracked tractor. Its design makes it possible to study HT circuits of the type with a differential «at the output», the type with a differential «at the input» for both wheeled and tracked vehicles, and to simulate the process of work of a hydrovolumetric turning mechanism. Introduction of electric generators to the design makes it possible to estimate in practice the effectiveness of recuperation of kinetic energy at braking, as well as parasite power that circulates in the closed circuit of HT during acceleration and braking.</p><p>We give quasi-static characteristics of basic HT circuits that are simulated at the laboratory bench. The results were obtained based on an improved mathematical model that makes it possible to determine the volumetric, mechanical, and full performance efficiency coefficient of separate hydraulic machines in the direct and reverse flows of power and special working regions of hydraulic gear. For the transmissions with a differential «at the output», maximal performance efficiency coefficient reaches 83 %, indicating the proper selection of gear ratios and standard size of hydraulic machines.</p><p>The results obtained are of interest for industrial and design organizations, specializing in the development of transmissions for transportation vehicles. Employing the developed bench would significantly reduce the time between designing and industrial implementation. There is a possibility to confirm experimentally the efficiency and high technical-economic indicators of the proposed transmission. Such a bench will make it possible for scientific institutions to discover new phenomena and processes in HT, systematize the influence of gear ratios of reducers, planetary mechanisms, and their number, on the working processes in HT.</p>
Authors and Affiliations
Nikolay Mittsel
Keywords
Related Articles
- EP ID EP527898
- DOI 10.15587/1729-4061.2018.126548
- Views 58
- Downloads 0
Investigation of flaxseed meal proteins and their influence on wheat dough
<p>For the purpose of enrichment by protein substances, balanced by amino acid composition, the feasibility of using flax meal in the recipe of bakery products, which are the basis of diets, including in restaurants, is...
Determination of stresses and strains in the shaping structure under spatial load
<p>The computational model of the machine – environment system, taking into account the mutual influence of the working body and compaction mixture was developed. It is based on the condition of determining the contact f...
Improving steel melting intensity in the process of electrosmelting from waste and pellets (HBI)
<p>The paper addresses the issue on improving the intensity of melting in the production of steels using hot briquetted iron (HBI) in the charge that mostly consists of metal waste. An analysis has been performed into th...
Modeling of reliability of logistic systems of urban freight transportation taking into account street congestion
<p>Mathematical formulation of the problem of forming urban freight transportation is performed. The structure of the system information model is developed, which takes into account material, energy and information flows...
The optimization algorithm for the directions of influence of risk factors on the system that manages the potential of machine-building enterprises
<p>The lines of influence of risk factors on the system of management of financial potential of machine-building enterprises were determined. Their application makes it possible to provide enterprises with complete and r...