DESIGN OF WATER HAMMER CONTROL STRATEGIES IN HYDROPOWER PLANTS
Journal Title: Applied Engineering Letters - Year 2018, Vol 3, Issue 1
Abstract
Hydropower plants play an important role in the growth of the renewable energy sector. The main objective of the paper is to present, discuss and assess critical parameters which may cause unacceptable water hammer loads in hydropower plants. Water hammer is caused by flow disturbances in a conduit from one steady state to another. It induces pressure rise or drop in hydraulic systems, rotational speed variation in hydraulic turbomachinery and level fluctuation in surge tanks and air chambers. Design principles of water hammer control strategies (mitigation of excessive loads) are outlined including operational scenarios (closing and opening laws), surge control devices (flywheel, surge tank, regulating valve, air valve, etc.) or redesign of the pipeline components. Water hammer models and solutions are briefly discussed in the light of their capability. Case studies include hydropower plants with long fluid conveying systems (open channels, tunnels) and water hammer control devices (surge tank, regulating valve).
Authors and Affiliations
Anton Bergant, Jernej Mazij, Uroš Karadžić
DEFORMATION RESPONSE OF DUAL PHASE STEEL IN STATIC AND DYNAMIC CONDITIONS
In this work, strength and plastic deformation effect of the dual phase steel are analysed in the static and dynamic conditions. Since the dual phase steel is extensively used in the outer body parts of the automotive ve...
ANALYSIS OF ROUGHNESS PARAMETERS OF LATERAL BACK SURFACES OF MODEL HOB MILLING TOOLS DURING CYLINDRICAL GEAR CUTTING
The problem of generating is analyzed in science and practice in various ways by identifying it once as an element of the machine, and the second time as a part of production, that is, a final product. The nature of the...
ALTERNATIVE DRIVE SYSTEMS AND ENVIRONMENTALY FRIENDLY PUBLIC PASSENGERS TRANSPORT
City transport causes the biggest part of road transport emissions. Besides, by engaging mainly fossil fuels in the city transport, we are responsible for air pollution in urban areas. On the other hand, passengers trans...
TOPOLOGY DESIGN AND MODAL ANALYSIS OF A BRACKET VIA FEA
In this study, topology optimization of a jet engine bracket which was proposed from GE Aviation challenge for improving the brackets is presented using finite element analysis (FEA). The minimum mass, maximum equivalent...
AN INTEGRATED APPROACH FOR DESIGN AND MANUFACTURE OF PLASTIC PRODUCTS
The aim of this paper is to present an integrated design procedure for plastic part development and manufacture. Reverse engineering (RE), re-engineering (ReE) and mold design have been incorporated to infuse agile chara...