Design Optimization of Rotor Propulsive Delta Wing
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
The Wing Rotor Configuration is designed for the purpose of VTOL (vertical takeoff and landing) which is a combination of Delta wing and rotor together integrated at the empennage section of the aircraft wing. The model of the delta wing rotor configuration will be modelled by using the solid works part modelling software, later the model will be studied in cfd to understand the aerodynamic performance of the aircraft. The objective of the work is to achieve high aerodynamic efficiency of the chosen configuration. The model analysis includes static and CFD analysis where flow analysis is the primary function, deflection and stress distribution is calculated in the static analysis in ansys static structural module and velocity streamlines and pressure distribution is calculated in the flow analysis which is done using the CFD module of ansys software , major applications include VTOL of different aircrafts [majorly UAV’S (unmanned aerial vehicle), MAV’S (micro aerial vehicle), and fighter aircrafts.[1]
Authors and Affiliations
M. Thilakraj, V. Ravi, K. Sunil Charkravarthy
Keywords
Related Articles
- EP ID EP656568
- DOI 10.24247/ijmperdaug201991
- Views 80
- Downloads 0
PORT DEVELOPMENT IN SUPPORTING CONNECTIVITY SYSTEM OF ARCHIPELAGO REGION
The development of port infrastructure and connectivity between ports could influence the economic improvement of natural resources potency related to the population prosperity. Therefore, port development is needed -so...
PERFORMANCE AND EMISSION CHARACTERISTICS OF A TWIN CYLINDER DIESEL ENGINE BLENDED BIODIESEL WITH NANO ADITIVES USING RESPONSE SURFACE METHODOLOGY
This analysis was expected to examine the consequence of injection system parameters and operating parameters (i.e injection pressure and engine load) on the performance and the ignition distinctiveness of a TC4SDIDE. Bi...
Processing and Mechanical Testings of 7075 AL Matrix Composite Reinforced with AL2O3 Nano-Particles Fabricated by Stir Casting Route
There is a massive demand for lightweight, cost-effective and rapidly processed products because of their significant level of excellence in these days. In the present work, the impact of electric stir casting on 7075 ba...
Mode 1 Delamination Analysis and Its Comparative Study of Carbon/Epoxy, Graphite/Epoxy and Kevlar/Epoxy Composite Structures using Vcct in Ansys
In polymer composite materials manufactured using conventional hand layup technique is more prone to delamination. Delamination is one type of common failure observed in laminated composites. In present investigation del...
Experimental Evaluation of Closed Loop Pulsating Heat Pipe with Water based Working Fluids
In this paper, thermal performance of closed-loop pulsating heat pipe was experimentally analysed. PHP consists of three different sections namely evaporator, adiabatic and condenser. For experimentation copper tube havi...