DESIGNING AND ANALYSING DIFFERENT SHAPES OF MEMS BASED ELECTROSTATICALLY CONTROLLED MICROMIRRORS
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 4, Issue 7
Abstract
in adaptive optics and point - to - point communication, various micro mirror devices have been used to reshape the wavefront of a propagating beam to compensate for aberrations in the beam path. Such MEMS mirrors offer inherent advantages in speed, compactness, and economy in comparison to their macroscale counterparts. [6].Mirrors are fundamental components of most op tical systems. The miniaturization of optical components leads to higher packaging density and increased speed of devices that manipulate light. This is part of the vast field of Microsystems technology, designated by Micro - Opto - Electro - Mechanical Systems (MOEMS), in which electronic, mechanical, and optical devices are integrated on the micron scale [4]. This paper describes about various micromirror shapes to allow for determination of optimal, distortion minimizing Micromirrors .Different shapes of micro mirrors namely square , circular[3] and hexagon shaped [5]are designed and these micro mirror models are simulated by using COMSOL Multi physics Software . Electrostatic actuation is used to defect the micromirror. The most important parameter involved in the working of micromirror during lift off is the surface deformation and here mirror is designed to reduce mirror deformation i.e., to maintain flat surface at top during lift off so that distortion can be minimized .So the results of all the three differ ently shaped micromirrors are analyzed in terms of less induced stress along edges of micromirror due to lift off ,least surface deformation during lift off and maximum displacement of the micromiror [1,2]
Authors and Affiliations
Pooja
Keywords
Related Articles
- EP ID EP153328
- DOI -
- Views 100
- Downloads 0
Finite Element Analysis of Truck Chassis
Automotive chassis is an important part of an automobile. The chassis serves as a frame work for supporting the body and different parts of the automobile. Also, it should be rigid enough to withstand the shock,...
Monitoring of Geological CO2, based on Wireless Sensor Networks
Carbon Capture and Storage (CCS), also known as Carbon Capture and Sequestration, includes geological storage CO2. Safe, long-term geological storage (sequestration) of CO2 also requires a continuous monitoring sy...
UPGRADATION OF SALINE SOIL BY PHERETIMA SPECIES OF LAKHUWALI HEAD HANUMANGARH, RAJASTHAN, INDIA
Vermicompost is very necessary to full fill the high demand in agriculture field. It is challenging condition to grow plant in saline area at Hanumangarh. The low marginal content are found in saline soil Lakhuwal...
CONTROLLER DESIGN FOR HYBRID POWER SYSTEMS
In this paper an efficient design along with modeling and simulation of a transformer-less small-scale centralized AC—bus Connected Hybrid (Wind–PV) power system for supplying electric power to a single phase loa...
Fabrication of Hetarolite-ZNMN2O4 by Solvothermal Method and its Nanostructural Characterization
Hetarolite-ZnMn2O4 nanoparticles were synthesized by hydrothermal/solvothermal method using Mn (CH3COO)2·4H2O and Zn(CH3COO)2.2H2O as precursors and Oleic acid as surfactant at synthesis temperature of 180ºC for...