Designing the organoplastics based on aromatic polyamide, study of their operational properties and applicability
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 4, Issue 12
Abstract
<p>Polymeric composite materials that are reinforced with organic fibers are characterized by great possibilities in terms of improving the durability of friction nodes in machines and mechanisms. These composites successfully compete with non-ferrous metals and their alloys and, in some cases, outperform polymeric and metallic analogs by their properties. In this regard, we have studied the influence of the organic fiber lola on operational characteristics of the aromatic polyamide phenylone, brand C-1, and on possibilities to apply the developed polymeric composite materials.</p><p>Experimental studies have confirmed that the reinforcement of phenylone with the organic fiber lola in the amount of 5–15 % by weight improves its operational characteristics. This is predetermined by the arrangement of the supramolecular structure of the basic polymer due to the introduction of organic fiber. Thus, at the interface " phenylone-filler" one clearly observes the transformation of the binder's globular structure into fibrillar one. That leads to a positive effect: there is an increase in destruction energy (by 1.5 times) and chemical resistance (by 1.1–1.36 at aging in 5 % HCl, and by 1.27–1.6 ‒ in 10 % HCl). It should be noted that the developed organoplastics are stable at a temperature of 673 K, while the starting polymer begins to destroy intensively at 400 K. Specifically, it was determined that at a further increase in the mass fraction of the filler these indicators deteriorate, due to insufficient adhesion between the filler and the binder.</p>Using the organic fiber lola (in the amount of 5–15 % by weight) makes it possible to obtain composites with improved operational characteristics: enhanced thermal and chemical parameters, high resistance to impact loads. Thus, there is reason to argue about the prospects of using the fiber lola as a filler for composites. Organoplastic with an optimum fiber content (15 % by weight) is recommended for manufacturing the components of tribological nodes for modern equipment instead of non-ferrous metals and their alloys due to sufficiently high operational properties.
Authors and Affiliations
Anna-Mariia Tomina, Yekaterina Yeriomina, Viktor Terenin
Keywords
Related Articles
- EP ID EP667091
- DOI 10.15587/1729-4061.2019.176698
- Views 92
- Downloads 0
Analytical study of starting current of the induction motor stator
<p>In a three-phase coordinate system, the induction motor is described by a system of nonlinear differential equations of the eighth order, which in a general case does not have an analytical solution. The system of IM...
Mechanoactivation of Portland cement in the technology of manufacturing the selfcompacting concrete
<p>This paper examines the intensive separation technology for producing a self-compacting concrete (SCC). We substantiate the proposed technology of SCC production through the effective control over viscosity of cement-...
Localization and navigation of mobile robots in an environment with variable properties
<p class="a"><span lang="EN-US">A method of localization and navigation of a mobile robot in an environment with variable properties in conditions of limited possibilities was proposed for remote control which provides f...
Studying the complex of biologically active substances in spicy vegetables and designing the nanotechnologies for cryosupplements and nanoproducts with health benefits
<p>We determined the complex of BAS of spicy vegetables (roots of ginger, celery, horseradish, and garlic), which differ from other vegetable raw materials by a high content of unsaturated reactive phyto-substances. It i...
Development of a method for optimizing operation of centrifugal gas superchargers under conditions of uncertainty
<p>A problem of development of a method of optimal control of operation of natural gas superchargers by a criterion which both minimizes fuel gas consumption and takes into account power of nitrogen oxide emissions into...