DETAIL ANALYSIS OF THE SURFACE PLASMON RESONANCE PRISM BASED SENSORS ELEMENT
Journal Title: Вісник Національного університету "Львівська політехніка", серія "Радіоелектроніка та телекомунікації" - Year 2017, Vol 885, Issue 2017
Abstract
The theoretical research and experimental verification of the surface plasmon resonance prism based sensors element have been carried out. This research includes the simulation of optical characteristics, optimization of geometric parameters and the production and research of an experimental low cost prototype with simple construction. The influence of the thickness change of the silver and chromium layers on the position of the reflectance minimum, which corresponds to the surface plasmon resonance, has been investigated. The change in the thickness of the silver layer affects on the position of the surface plasmon resonance, the value of the reflectance in the minimum and the curve shape. The change in the thickness of the chromium layer practically does not affect on the position of the surface plasmon resonance. However, it should be noted that the thickness of the chromium film affects on the value of the reflectance minimum and the curve shape. It is founded that the smaller the wavelength of the radiation source will correspond to the greater the angle of the surface plasmon resonance. The dependences of the reflectance on the change in the refractive index of the studied gas and water media with different refractive indices were simulated. The optimal parameters of the sensor element with enhanced sensitivity have been determined. A prism based sensors element was produced. The experimental scheme of investigation optical characteristics of the prism based sensors element was developed. There is a good correlation between theoretical and experimental results.
Authors and Affiliations
Iryna Yaremchuk, H. Petrovska, Volodymyr Fitio, Yaroslav Bobitski
Keywords
Related Articles
- EP ID EP456380
- DOI -
- Views 145
- Downloads 0
CRYSTAL STRUCRURE OF THE MIXED RARE EARTH FERRITES Pr0,5R0,5FeO3 (R = Nd, Gd, Tb, Dy, Ho)
The work deals with the study of the phase composition and crystal structure of new mixed ferrites Pr0,5R0,5FeO3 (R = Nd, Gd, Tb, Dy, Ho) obtained by solid state reactions technique. It was established that all samples s...
QUANTITATIVE ASSESSMENT OF CONTRAST OF THE IMAGE ELEMENTS
One of the main tasks of image preprocessing is to improve the quality of images. The image quality is characterized by several characteristics. One of the main objective characteristics among them is the image contrast....
RESEARCH OF THE FREQUENCY PLANNING METHODS FOR CELL NETWORKS BASED ON LTE AND GSM TECHNOLOGIES
Modern researches in field of mobile network depend on network infrastructure in a specific region. Nowadays, the actual issue is reforming of the existing frequency range for LTE deployment. The most common band is 900/...
METHOD OF SUBSCRIBER NETWORK LOAD BALANCING IN CELULAR NETWORK
This paper is devoted to the solving the problem which occurs in cellular networks at times of peak busy hour when the radio resources are ended in one or more cells. Proposed method increases the availability of radio r...
DEVELOPING OF MOBILE ROBOTIC TECHNICAL SYSTEM BASED ON FPGA
In the article the structure of the designed FPGA based mobile robot technical system is described. For the design the block-hierarchical approach was used. This system includes the following elements: - the MicroBlaze s...