Detection of Cucumber Fruit on Plant Image Using Artificial Neural Network
Journal Title: Journal of Agricultural Machinery - Year 2023, Vol 13, Issue 1
Abstract
The main purpose of this study was to provide a method for accurately identifying the position of cucumber fruit in digital images of the greenhouse cucumber plant. After balancing the brightness histogram of the desired image, it multiplies the image with a window containing the image of a cucumber fruit, which causes larger coefficients to be obtained in areas with suspected cucumber. By extracting these local maximums, clusters of initial points are obtained as possible windows of cucumber existence. Then, in order to accurately detect the location of the cucumbers, these points and areas around them are referred to a neural network that has been trained using a number of images including cucumber images, non-cucumber images and their optimal responses. The proposed method was implemented in the Simulink toolbox of MATLAB software. The proposed method was then simulated using this network structure and tested on 120 images obtained from a greenhouse by a digital camera. The areas obtained from this network led to the accurate detection of the location of the cucumbers in the image. The proposed method was then simulated and tested on 120 images. The proposed method had a low error and was able to detect high levels of cucumber fruit in the images. This detection took an average of 5.12 seconds for each image. The accuracy of the network in correctly identifying the position of the cucumber fruit in the images was 95.3%. This method had low error and was able to detect a high rate at a good time of cucumber fruits in discover images.
Authors and Affiliations
D. Mohamadzamani,S. M. Javidan,M. Zand,M. Rasouli,
Keywords
Related Articles
- EP ID EP718065
- DOI https://doi.org/10.22067/jam.2022.73827.1077
- Views 65
- Downloads 0
Evaluation and Comparison of Three Types of Pistachio Hullers Used in Kerman Province
The objective of this study was to evaluate different pistachio hullers and determine the proper harvest time of pistachio nuts for hulling. Three pistachio hulling machines (Helical drum, Helical- blade drum, Rubber dru...
A Finite Element Model of Soil-Stress Probe Interaction under a Moving Rigid Wheel
Machinery traffic is associated with the application of stress onto the soil surface and is the main reason for agricultural soil compaction. Currently, probes are used for studying the stress propagation in soil and mea...
Development and Evaluation of an Onion Harvester Machine with Excrescence Axes
Introduction It is common to use rod weeders for onion harvesting according to their prevention of root blocking in front of the machine and separation of onion bulbs from soil by shaking. Chesson et al., (1977), used a...
Vibration Mode for Effective Mechanical Harvesting of Shengy Olive
The main aim of this study was to optimize the design parameters of the fruit shakers for efficient harvesting of Shengy olive. A single-degree-of-freedom spring-mass model was established to determine the natural freque...
Design, Fabrication and Evaluation of a Wet Cattle Manure Size Reduction Machine
Introduction The annually production of cattle manure is estimated around six million tons in Iran. Manure transportation with high moisture and low density recognized as crucial issue. The densification of dry or wet ma...