DETERMINATION OF COMPOSITION, MELTING HEAT AND THE CRYSTALLINITY DEGREE OF POLYAMIDE PHASE IN POLYAMIDE-6/BARIUM TITANATE SYSTEM
Journal Title: Civil and Environmental Engineering Reports - Year 2007, Vol 1, Issue 2
Abstract
The method of determination of ceramics contents and melting heat of polymer phase in composite PA-6/BaTiO3 has been suggested. Samples of composite have been obtained by polymerization of caprolactam in which the fine particles of barium titanate were dispersed. The obtained samples have been characterized by means of specific volume measurements and the DSC technique. Contents of barium titanate and melting heat of polyamide phase have been calculated using suitable equations.<br/><br/>
Authors and Affiliations
Marek Gąsiorek, Stefan JERZYNIAK
ECOLOGICAL AND ECONOMIC ASPECTS OF THE APPLICATION OF SEWAGE SLUDGE IN ENERGETIC PLANT PLANTATIONS - A SWOT ANALYSIS
Sewage sludge management in Poland is a relatively new field of waste management called “in statu nascendi”, the standards of which have not been recognized yet. It also requires the implementation of new solutions in th...
PLASTICITY AND SWELL-SHRINK BEHAVIOUR OF ELECTROKINETICALLY STABILIZED VIRGIN EXPANSIVE SOIL USING CALCIUM HYDROXIDE AND CALCIUM CHLORIDE SOLUTIONS AS CATIONIC FLUIDS
This investigation focussed on the plasticity and swell-shrink behaviour of an expansive soil that was stabilized using electro kinetic stabilization (EKS) techniques with cationic fluids for enhancement of stabilization...
NUMERICAL ANALYSIS OF EFFECTIVENESS OF STRENGTHENING CONCRETE SLAB IN TENSION OF THE STEEL-CONCRETE COMPOSITE BEAM USING PRETENSIONED CFRP STRIPS
One of the methods to increase the load carrying capacity of the reinforced concrete (RC) structure is its strengthening by using carbon fiber (CFRP) strips. There are two methods of strengthening using CFRP strips - pas...
ANALYSIS OF STRONGLY NON-LINEAR FREE VIBRATIONS OF BEAMS USING PERTURBATION METHOD
The possibilities of application of the perturbation method to the analysis of strongly non-linear free vibrations of beams are discussed. The geometrical non-linearity is taken into account. The finite element method is...
TESTS OF A REINFORCED CONCRETE FRAME BEAM SUBJECTED TO SEISMIC-TYPE LOADING
The experimental results from reversed cyclic loading tests on twelve exterior reinforced concrete beam-column joints are presented. The primary variables were the ratio of positive to negative reinforcement and the stir...