DETERMINATION OF CURRENT SETTING TIME IN INDUCTIVE LOAD OF VOLTAGE-TO-CURRENT CONVERTER UNDER NON-HARMONIC INFLUENCE
Journal Title: Вісник Національного університету "Львівська політехніка", серія "Радіоелектроніка та телекомунікації" - Year 2013, Vol 766, Issue 2013
Abstract
The paper presents analysis of problems dealing with the determination of the current setting time in the inductive component of the complex load of Voltage-to-current (VTC) converter under non-harmonic input influence. There is showed the change in the transient response and in the current setting time of the inductor on changing the VTC converter and complex load parameters. Expression to determine the current setting time of complex load of VTC converter at given level of dynamic error is presented. The estimation of dynamic error in determining the current setting time is presented in accordance with the time dependencies of transient responses of current setting in inductive load of VTC converter with complex load’s and VTС’s converters different parameters. The mathematical model of precision VTC converter [1] with deflection system (DS) of cathode-ray tube (CRT) of television scanning optical microscope connected to its output has been designed and is presented as a complete equivalent circuit taking into account the resistance and parasitic capacitance of load. In accordance with the set conditions of raster formation on screen of such CRT, the control of converter is carried out by non-harmonic signal with variable shape, frequency, amplitude and displacement [2]. Precision VTC converter built as parallel circuit with a deep DS’s current feedback, the signal of which is formed on the feedback resistor, which is connected in series with the load, has been studied. To ensure the aperiodic current setting the bypass resistor is connected to the load in parallel. While analyzing this circuit we’re considering that: the static error due to instability of comparison resistors and feedback resistor is equal to zero, the cutoff frequency of VTC converter is higher than the resonant frequency of the load, and the error due to resistance of DS is compensated. The mathematical model allows to carry out a complete theoretical study of precision VTC converter and to get expressions to determine the parameters upon certain conditions: 1) supply voltage of VTC converter is higher than the maximum voltage on the DS during the transition process; 2) amplifier is presented as one inertial circuit with real parameters: unity gain frequency fВ , gain amplifier K0 ; 3) the resistance of DS rL and parasitic capacitance CL are taken into account at analysis; 4) considered that the feedback resistor RЗЗ is non-inductive; 5) the current flowing through the resistor R2 relative to current of feedback resistor is very small and it is neglected.
Authors and Affiliations
V. Vasylyuk, Volodymyr Shkliarskyy
Keywords
Related Articles
- EP ID EP460987
- DOI -
- Views 111
- Downloads 0
SURFACE PLASMON-POLARITONS NANOSCALE WAVEGUIDES OBTAINED BY OPTICAL PHOTOLITHOGRAPHY
The paper presents a method of phased optical lithography using as source, lightemitting diodes (LED) with wavelengths of 410 nm and 365 nm to form inhomogeneous dielectric waveguides. Distribution of surface plasmon pol...
RESEARCH ON QUALITY OF SERVICE PARAMETERS FOR PHOTONIC TRANSPORT NETWORKS
Designing the photonic transport networks is the task of great complexity, because of variety traffic queues should be transmitted with different priorities. Task of dynamic supporting the different quality of service (Q...
ANALYSIS OF PLANAR WAVEGUIDES BY PERTURBATION METHOD
One of the important tasks today in the field of communications and information technologies is the ability to provide high-speed data transmission using fiber-optic communication lines. The presence of existing homo- an...
THE METHOD OF INCREASE EFFICIENCY TO USE NETWORK RESOURCES ІN INFORMATION AND TELECOMMUNICATIONS SYSTEMS
For optimization of using physical resources of optical path, reducing the probability of blocking when laying new logical channels in this paper has been developed method of local distribution and control segment multis...
RELIABILITY MODEL OF FAULT-TOLERANT SYSTEM BASED ON THE MAJORITY STRUCTURE {3 OF 5} WITH COMBINED STRUCTURAL REDUNDANCY AND MAINTENANCE
Designing of radio-electronic systems of responsible purpose with hardware-software implementation involves the mandatory provision of their property of fault-tolerance. The property of fault-tolerance are provided by th...