Determination of Fatigue Resistance of Vehicle Wheels by Structural Analysis
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2015, Vol 3, Issue 3
Abstract
Wheels rim which run under static and dynamic loads on vehicles are critical elements. Running wheels rim on surfaces under repeated stress, depending on the time, after a certain number of repeated, cracks occur. As a result of the progress of cracks breakage occurs in the material. In this study, rims of according to standard fatigue strength tests on the fatigue life tester is made. Also the wheels of the virtual environment was created by ANSYS 14.0 engineering simulation software and fatigue strength analysis was performed. Tests on fatigue testing machine with the analysis made in ANSYS 14.0 were compared.
Authors and Affiliations
Aydın ŞIK, Murat ÖNDER, M. Sadi KORKMAZ
Keywords
Related Articles
- EP ID EP476200
- DOI -
- Views 109
- Downloads 0
Control And Monitoring Of Controller Area Network Based Motor And Sensor Boards
Remote control system also can use to provide the control of devices that are used in industrial environments nowadays. In this study, three experimental modules and one master module have been developed by using Arduino...
Use of Dspic in Mıcrocontroller Based Systems and Sample Application Development Process
Nowadays, microcontroller based control and monitoring systems are being used in several industrial applications. This study deals with dsPIC (Digital Signal Controller) microcontroller, usage of which is becoming more w...
Tent Map based Optimization Method
In the real life, some problems cannot be solved using mathematical methods. Meta-heuristic optimization methods are usually used to solve these problems. One of the solutions used to increase the performance of meta-heu...
Array Feed Parabolic Reflector Antennas Design Having Low Near Sidelobe and Backlobe Levels
Antennas which are one of the most important components that designate the system characteristic in radar systems, nowadays have a substantial position in military as well as civil areas. Due to their narrow beamwidth an...
The Effect of Heat Treatments on Alloying of Pre-mixed Al + 4.5 wt. % Cu Powders
In this study, 4.5 wt. % Cu powder was added to Al powder and mixed for 45 minutes to produce premixed metal powders. Premixed powders were compacted by cold pressing at 20 MPa. After that these samples were pressed at 5...