DETERMINATION OF INFLUENCE OF THE PARAMETERS CONNECTED WITH THE STABILIZATION OF THE POSITION ON THE 5-AXIS MANIPULATORS’ OPERATION ACCURACY
Journal Title: Journal of Machine Engineering - Year 2018, Vol 18, Issue 2
Abstract
The 5-axis systems, especially those that use in their kinematic chain both prismatic joints and revolute kinematic pairs are gaining popularity in many scientific disciplines with manufacturing, metrology and robotics at the forefront. This is therefore important to undertake research aiming in identification of sources of inaccuracies in their functioning and investigation on possibility of eliminating or compensating them. A significant impact on 5-axis kinematic structures accuracy may be assigned to parameters associated with the stabilization of the machine position and angular position, such as position stabilization time, position overshoot and drift of positioning accuracy. These parameters are well described in ISO 9283 standard related to performance criteria and test methods for industrial robots. The methodology presented in this standard is adapted for testing the impact of mentioned parameters for functioning of 5-axis kinematic structures other than industrial robots, which mainly include five-axis coordinate measuring systems and machine tools. A series of experiments performed on five-axis coordinate measuring system is presented in this paper, their results are assessed in a quantitative manner and basing on them a general algorithm for assessing the significance of impact of position stabilization parameters on functioning of the manipulator is proposed.<br/><br/>
Authors and Affiliations
Adam GASKA, Wiktor HARMATYS, Maciej GRUZA, Piotr GASKA, Jerzy SLADEK
Keywords
Related Articles
- EP ID EP346530
- DOI 10.5604/01.3001.0012.0926
- Views 59
- Downloads 0
MACHINE LEARNING IN SMED
The paper discusses Single Minute Exchange of Die (SMED) and machine learning methods, such as neural networks and a decision tree. SMED is one of lean production methods for reducing waste in the manufacturing process,...
ENHANCING LASER STEP DIAGONAL MEASUREMENT BY MULTIPLE SENSORS FOR FAST MACHINE TOOL CALIBRATION
The volumetric performance of machine tools is limited by the remaining relative deviation between desired and real tool tip position. Being able to predict this deviation at any given functional point enables methods fo...
INFLUENCE OF LINEAR FEED DRIVE CONTROLLER SETTING IN CNC TURNING LATHE ON THE STABILITY OF MACHINING
The paper deals with the influence of linear feed drive controller setting of a CNC turning lathe on the stability of machining. A coupled simulation model of feed drive control and ball screw drive mechanics with a tra...
ENERGY-BASED CHARACTERIZATION OF PRECISION HARD MACHINING USING PARTIALLY WORN CBN CUTTING TOOLS
This paper highlights the performance of precision hard turning with CBN cutting tools from energy point- of-view with additional tool wear effect. For this purpose several wear tests were performed during which the tool...
Evaluation of different approaches to 3d numerical model development of the contact zone between elementary asperities and flat surface
This paper presents two triaxial finite element (FE) models: a “full model” and a “quarter model”, representing the contact between the specimen’s rough surface and the ideally smooth and flat surface of the punch. Model...