Determination of mechanical properties of steel 15Kh2NMFA using instrumented indentation results
Journal Title: Вісник Тернопільського національного технічного університету - Year 2018, Vol 89, Issue 1
Abstract
The algorithm of reproduction of the deformation curve for the tensile test specimens using the contact deformation diagram parameters has been devised. The mechanical characteristics of steel 15Kh2NMFA have been determined from the uniaxial tension diagram obtained by the instrumented indentation method. It is illustrated that the deflection between the strength characteristics determined from the indentation and tensile test results does not exceed 1%.
Authors and Affiliations
Oleg Katok, Ievgen Kondryakov, Roman Kravchuk, Valeriy Kharchenko
Keywords
Related Articles
- EP ID EP289549
- DOI 10.33108/visnyk_tntu2018.01.052
- Views 66
- Downloads 0
Fracture pecularities of prestressed steel reinforcement under hydrogenation in the model working medium
Pecularities of fracture behaviour of progressively drawn pearlitic steels from the initial hot rolled bar (not cold drawn at all) to the final commercial product (prestressing steel wire) were investigated in air and un...
The mathematical model of electroenсephalographic and electromyographic signals for the task of human communicative function restoration
The article is devoted to the questions of substantiation the mathematical model of the electroencephalographic signal, registered from the surface of head near the speech centers of brain, and the electromyographic sign...
Defining parameters of elastic-safety clutches for screw conveyers
The designs of elastic-safety clutches of screw conveyors are offered allowing, except safety conditions, due to damping and elastic properties to ensure smooth start of conveyor screw while in drive run-up and reduce th...
Phototherapy device with determination of absorbed energy dose
The article deals with comprehensive analysis of the most common design of devices being used for human skin irradiation in phototherapy. The authors determined that their main drawback is the lack of the possibility of...
Estimation of crack progration dynamics in WWER-1000 core barrel taking into account combined effect of high temperature, static loading and neutron irradiation [in Ukrainian].
Reactor in-core components is subjected to high radiation doses that results in change of form and swelling during operation. Inside pressure of baffle on core barrel in zone of contact in WWER-type reactors creates addi...