Determination of reliable concentrations of pollutants in raw wastewater based on different sampling methods
Journal Title: Civil and Environmental Engineering Reports - Year 2013, Vol 1, Issue 10
Abstract
The aim of this study was to check the extent to which the sampling method and the volume of sewage (size of the wastewater treatment plant) influence the determined daily average concentrations of pollution components. Within three days of dry weather, the composition of two raw sewage wastewater treatment plants was continuously monitored. The WWTPs were designed for the flow of 820 m3/d and 51000 m3/d, respectively. The concentrations of pollutants were measured in samples taken both in time-proportional and flow-proportional ways. The obtained values show the possibility of taking the samples mixed at equal time intervals and in proportion to the flow as reliable sources for design values of concentrations. The size of WWTP, i.e. the amount of investigated raw sewage, was of no significant importance to the obtained results regarding concentrations of pollutants.<br/><br/>
Authors and Affiliations
S. Myszograj, Z. Sadecka, O. Qteishat, M. Suchowska-Kisielewicz
Keywords
Related Articles
- EP ID EP346907
- DOI -
- Views 58
- Downloads 0
THE THEORETICAL ANALYSIS OF MASS AND ENERGY FLOW THROUGH SOLAR COLLECTOR - CHIMNEY SYSTEM
The goal of the paper was to simplify the designing process for mass and energy flow through solar collector - chimney system. Theoretical analysis allowed to get involved system of three nonlinear analytical equations i...
The effect of the addition of cellulose on the quality and thermal properties of straw bedding
The objective of the study was to determine the effect of the addition of recycled cellulose on the quality and temperature of the straw bedding. Starting from week 2 of the production cycle temperatures were registered...
Rheological redistribution of stresses in multi-layered beams
The paper concerns problems of rheology in wooden structures reinforced with polyester-glass composite bars glued to them by means of epoxy resin. A theoretical model of the behaviour of a multi-layered beam is presented...
ANALYSIS OF POSSIBILITY OF YEAST PRODUCTION INCREASE AT MAINTAINED CARBON DIOXIDE EMISSION LEVEL
Main parameters polluting of technological wastewater (dregs from decantation and thicken of the wort) from yeast industry are: nitrogen, potassium and COD. Such wastewater are utilized mostly on agricultural fields. Unf...
BUILDING RESTORATION OF HISTORIC POOL IN BOLESŁAWIEC: ASSUMPTIONS, DESIGN, REALIZATION
The present elaboration describes realization of project task, entitled: „Retrieving old function in historic swimming pool, at 52 Zgorzelecka street in Bolesławiec”, it has an influence with taking into consideration th...