DETERMINATION OF ROLLING RADIUS OF SELF-PROPELLED MACHINES’ WHEELS
Journal Title: INMATEH-Agricultural Engineering - Year 2019, Vol 57, Issue 1
Abstract
The obtained results allow calculating the actual rolling radius of the wheel and evaluate the slipping of the drive wheels of self-propelled machines in accordance with the air pressure in the tires and the parameters of interaction with the support surface. On the basis of the developed model for determining the initial radius of the wheel and the length of the contact zone of the wheel with the support surface, the dependence for determining the actual radius of the wheel rolling was obtained. The studies have confirmed an increase in the actual rolling radius and a decrease in wheel slip with an increase in air pressure in the tires. For example, for the rear wheel of a tractor John Deere 7130 with an increase in pressure from 0.6 to 2.6 atm, an increase in the rolling radius by 21 mm and a decrease in the slip coefficient from 1.94 to 0.83% were observed. For the front wheel, when the pressure changed from 1 to 2 atm, the rolling radius increased by 7 mm and the wheel slip coefficient decreased from 1.76 to 1.12 %. The determination index of calculated and experimental values of the real rolling radius is η2 = 0.98 for the front and η2 = 0.99 for the rear wheels, which indicates the adequacy of the calculated dependences.
Authors and Affiliations
G. A. Golub, V. V. Chuba, O. A. Marus
Keywords
Related Articles
- EP ID EP552969
- DOI -
- Views 86
- Downloads 0
THE INFLUENCE OF BASIC PARAMETERS OF SEPARATING CONVEYOR OPERATION ON GRAIN CLEANING QUALITY
The rational succession of technological operations of all-purpose grain cleaning machines was substantiated at the Department of Agricultural Engineering at Central Ukrainian National Technical University. The original...
INFLUENCE OF TYPES OF TRACTOR RUNNING GEARS ON THE VALUE OF HOP GARDEN ROW SPACING COMPACTION
Based on experimental research, a method of comparing areas of compaction by tractor running gears in field conditions and in hop garden row spacing was suggested. Zones of inefficient and intensive use of hop garden row...
MATHEMATICAL MODEL FOR THE EVOLUTION OF Chlorella Algae
The paper presents an example of a mathematical model for algal cultures. The model presented is based on an elementary growth equation (more generally, evolution or dynamic, because it includes the phenomenon of decreas...
DETERMINATION OF ROLLING RADIUS OF SELF-PROPELLED MACHINES’ WHEELS
The obtained results allow calculating the actual rolling radius of the wheel and evaluate the slipping of the drive wheels of self-propelled machines in accordance with the air pressure in the tires and the parameters o...
DESIGN AND RESEARCH OF AUTOMATIC ALIGNMENT TEST DEVICE OF SEMI-FEEDING PEANUT COMBINE HARVESTER
For the caused harvesting loss problem by inaccurate alignment of the semi-feeding peanut harvester, an automatic alignment system on the control core of the single chip microcomputer μPD78F0525 was designed. The system...