Determination of stresses and strains in the shaping structure under spatial load
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 6, Issue 7
Abstract
<p>The computational model of the machine – environment system, taking into account the mutual influence of the working body and compaction mixture was developed. It is based on the condition of determining the contact forces of interaction between the subsystems and estimation of the ratio of the time of action and time of wave propagation. This approach is new, since it takes into account the real relationship between the dynamic parameters of the machine and the environment and degree of interaction. The study and determination of stresses and strains in time confirmed the hypothesis of their significant influence on the process. A fundamentally new result was revealed, which consists in the fact that the transition process should take into account the determination of parameters and locations of vibrators. The laws of stress and strain variations during spatial oscillations of the shaping surface were established. Modes of natural oscillations of the system are implemented with higher oscillation amplitudes and correspondingly lower frequency. And this opens up a real opportunity to reduce the energy intensity of the vibration machine. Numerical values of stresses and the nature of their distribution in the shaping surface, depending on the angle of the instantaneous action of the external force of vibrators, the presence of bending and torsional oscillations were obtained.</p><p>So under the condition of two excitation forces, the points of application of which are displaced relative to each other by ½ of the length of the structure, placing the force application points symmetrically at a distance of ¼ of the size of the structure on both sides allowed obtaining cophased and anti-phase directions of stresses and acting external force.</p><p>In calculations of vibration machines using shaping surfaces, it was proposed to take into account output numerical values of the amplitude-frequency mode of the oscillation exciter. Practical recommendations for the rational design of sections of shaping structures were developed and technological parameters were determined. To construct such shaping structures, the installation sites for vibrators were determined. The results obtained can be successfully used in related processes, for example, in the mining industry, as active surfaces for ore transportation, for the transfer of suspensions and solutions in the chemical industry</p>
Authors and Affiliations
Ivan Nazarenko, Viktor Gaidaichuk, Oleg Dedov, Oleksandr Diachenko
Keywords
Related Articles
- EP ID EP528288
- DOI 10.15587/1729-4061.2018.147195
- Views 64
- Downloads 0
Development of the imitation model of the two-stage separation process of oil
<p>In accordance with the law of preservation of the amount of substance, an imitation model for the process of two-stage oil separation has been developed. The creation of this model took into account the features of th...
Modeling of energy efficient solutions regarding the heating system and the facade heat insulation in the implementation of thermomodernization
<p>We substantiated design and construction-technological solutions for increasing the energy efficiency of thermomodernizable buildings and structures based on the conducted calculation-and-experimental and numerical st...
Estimation of the effect of temperature, the concentration of oxygen and catalysts on the oxidation of the thermoanthracite carbon material
<p>The effect of temperature, oxygen concentration and gas-air mixture flow rate on the oxidation efficiency of thermoanthracite carbon granular material with the formation of carbon monoxide and dioxide is considered. T...
Construction of a generalized model of the harmful substances biochemical destruction process kinetics under conditions of substrate inhibition using the methods of simulation modeling
<p>For the purpose of obtaining the complete range of solutions for substrate inhibition of varying intensity, the mechanism of enzyme kinetics in a biocell was modeled by a multi-channel queuing system. A full range of...
Studying the physicochemical regularities in the color- and phase formation processes of clinker ceramic materials
<p>The paper reports results of a comprehensive study, aimed at developing formulation-technological parameters for obtaining volumetrically dyed clinker ceramic materials with a wide range of colors. A possibility has b...