DETERMINATION OF THE EFFORTS THAT OCCUR IN THE CASE OF PERFORMING INNER THREADS WITH FORMING ROLLERS
Journal Title: TEHNOMUS - Year 2011, Vol 18, Issue 1
Abstract
The aim of this paper is to present a simplified model for the theoretical calculation of the deformation efforts that occur in the case of performing inner threads by forming rollers. Firstly, determination of the normal stress distribution along the roll-blank separation line is presented and then the calculus of the resulting force of deformation.
Authors and Affiliations
CRISTEA ION, CRINA RADU
Keywords
Related Articles
- EP ID EP92093
- DOI -
- Views 161
- Downloads 0
A PROBABILISTIC DYNAMIC MODEL ASSOCIATED TO A JACKSON NETWORK, WITH SERIES QUEUES; THE SOLUTION OF THE ASYMPTOTICALLY STABLE STEADY STATE
This article studies in detail a subclass of Jackson networks class, namely the subclass of computer networks with queues in series and comes to prove a theorem which is called the Jackson's theorem, which provides a for...
CONSIDERATIONS REGARDING THE FUNCTIONALITY OF THE CHUCK COLLETS
In this paper the authors aim to present the theoretical study of functionality of clenching mechanisms such as chuck collets, abbreviated MBE. For these chuck collets to function properly, a value for the angle of th...
PASIVE SUSPENSION MODELING USING MATLAB, QUARTER CAR MODEL, IMPUT SIGNAL STEP TYPE
The purpose of a vehicle suspension system is to improve ride comfort and road handling. In current article is simulated and analyzed the handling and ride performance of a vehicle with passive suspension system, quarter...
HEAT TRANSFER IN THE COOLER - CPU INTERFACE
The increased number of requests regarding the cooling of the computers and the miniaturization of electronic components, determined the search for new solutions for intensifying the heat exchange between the processor a...
APPLICATIONS OF FULL FACTORIAL DESIGN EXPERIMENTS FOR LASER WELDING
Laser welding using Nd: YAG laser with continuous emission is applied for a low alloyed steel. The study pursued molten areas characteristics in the material. On the weld cross section was measured weld width, weld depth...