DETERMINATION OF THE GLASS TRANSITION TEMPERATURE AND MODULUS OF PLA FILMS USING DYNAMIC MECHANICAL ANALYSIS AT AND AMPLITUDE OF 10

Journal Title: ASIAN JOURNAL OF NATURAL & APPLIED SCIENCES - Year 2014, Vol 3, Issue 1

Abstract

Polylactic acid (PLA) is an environment friendly biodegradable thermoplastic produced by micro organism synthesis through the fermentation of starch. It can be used in the manufacture of thermoplastic films used to produce packaging material in place of those produced from fossil fuels. Its introduction in the production of packaging material will reduce the consumption of petroleum, which releases Carbon Oxide, a greenhouse emission, unburned carbon fragments and other compounds that give rise to smog and air pollution on burning. It is also compostable, aiding solid waste management. In this study the mechanical properties of PLA were determined over a temperature and amplitude range in order to establish whether it can be used in the production of packaging material for single use purposes and of disposable items. The storage ( ) and loss ( ) moduli as well as the Loss Tangent ( ) and the Glass Transition Temperature (Tg ) of PLA films were determined using the Dynamic mechanical analyzer (DMA) model 2980, used in the Multistrain mode. The storage modulus of PLA at and amplitude of 10 was found to be 2220.00 MPa. The loss modulus for PLA was found to be 112.90 MPa at the same temperature and amplitude. Consequently, the elastic modulus of PLA was found to be 2222.87 MPa. This indicates that PLA is strong and tough at this temperature. From the peak of the loss modulus graph the Tg of PLA was found to be .Tgfrom the variation of loss tangent with temperature occurred at .

Authors and Affiliations

Muthui Z. W, Nderitu F. G, Hussein S. A, Kamweru P. K. Golicha, Ngumbu R

Keywords

Related Articles

PROCESS CAPABILITY EVALUATION OF SHAPED METAL DEPOSITION INTEGRATED SYSTEM THROUGH CONTROLLING THE DIMENSIONS OF FABRICATED PARTS OF AUSTENITIC STAINLESS STEEL

The aim of this work is to investigate the process capability of the shaped metal deposition processes to be able to fabricate products with geometries meet the required specifications of the designed parts. The intent o...

HUMIDITY EFFECTS AND MITIGATION ON GENERATORS IN THE COASTAL AREAS OF NIGERIA

Owing to unreliable electricity supply from the national grid, petrol generators are now an essential part of the energy supply in Nigeria. But Nigeria’s climatic environment affects the operation of these generators. Th...

SPACE LESS IN VIRTUAL LIVING

According to many experts, a new era has begun in human history since the turn of century, in which information and technology have deep effect on contemporary life. In fact, electronic revolution has changed professions...

Dry Season Analysis of the Physicochemical, Heavy Metal and Microbial Analysis of Usumang Stream in Abiriba, Ohafia L.G.A, Abia State, Nigeria

Dry season analysis of the Usumang stream at Amogudu Abiriba in Ohafia Local Government Area, Abia State, Nigeria was investigated at six stations which were Isi Usumang Amogudu I, Usumang 2, Isiafara Orunta Usumang Amog...

 PHYSICOCHEMICAL AND MICROBIOLOGICAL ANALYSIS OF WATER BODIES IN UTURU, ABIA STATE-NIGERIA

 Sequel to the increasing importance of Uturu town because of population increase arising from the location of two universities and over ten secondary schools and the importance of water in such a place, the physi...

Download PDF file
  • EP ID EP105030
  • DOI -
  • Views 131
  • Downloads 0

How To Cite

Muthui Z. W, Nderitu F. G, Hussein S. A, Kamweru P. K. Golicha, Ngumbu R (2014). DETERMINATION OF THE GLASS TRANSITION TEMPERATURE AND MODULUS OF PLA FILMS USING DYNAMIC MECHANICAL ANALYSIS AT AND AMPLITUDE OF 10. ASIAN JOURNAL OF NATURAL & APPLIED SCIENCES, 3(1), 12-19. https://europub.co.uk/articles/-A-105030