Determination of trace amounts of chromium ions in water and food samples using ligand-less solid phase extraction-based modified nano-boehmite(AlOOH)
Journal Title: Iranian Chemical Communication - Year 2017, Vol 5, Issue 4
Abstract
Chromium is one of the hazardous pollutants in industrial effluents. In this study, a new nano-boehmite modified with sodium dodecyl sulphate is developed for preconcentration trace amounts of chromium ions as a prior step to its determination by flame atomic absorption spectrometry. We investigated the effect of various parameters on the recovery of the analyte ions, including pH of sample solution, amount of sorbent, sample volume on extraction efficiency of the chromium ions. Under the best experimental conditions, the calibration curve was linear in the range of 1.0 -700.0 ng.mL-1 of chromium with R2 = 0.997. Detection limit was 0.6 ng.mL-1 in the original solution (3Sb/m) and the relative standard deviation for seven replicate determination of 0.5 µg.mL-1 chromium was ±2.4%. The developed method was successfully applied to the extraction and determination of chromium in water and food samples with satisfactory results.
Authors and Affiliations
Mohammad Rezaiati, Farhad Salimi
Keywords
Related Articles
- EP ID EP260515
- DOI -
- Views 114
- Downloads 0
Melamine trisulfonic acid as a highly efficient catalyst for the synthesis of polyhydroquinolines under solvent-free conditions
A highly efficient, simple and clean solvent-free protocol for the synthesis of polyhydroquinolines is described. The one-pot multi-component condensation reaction between arylaldehydes, dimedone (5,5-dimethylcyclohexane...
Pharmacological properties of some 3-substituted indole derivatives, a concise overview
Indole is a nitrogen-containing heterocycle. It is a very important motif in agriculture and pharmacy. Many compounds containing indole moiety has been isolated form nature. It is also an important part in natural alkalo...
Fabrication and Characterization of Nanostructured TiO2 and Turmeric Spent Incorporated Polystyrene Hybrid Nano Composites
A series of polystyrene hybrid nanocomposites have been fabricated with varying amounts of TiO2 viz., 0, 0.5 and 1 % w/w along with 3% TS by in-situ polymerization method. The influence of surface modified TiO2 nanoparti...
Wavelength region selection and spectrophotometric simultaneous determination of naphthol isomers based on net analyte signal
Naphthol isomers were simultaneously and spectrophotometrically determined in wastewater, using a model based on net analyte signal (NAS). The calibration method used is a variation of the original hybrid linear analysis...
Theoretical models for determination of weight percent of PHCS-g-PLLA co polymer using experimental data
The amphiphilic graft copolymer using chitosan (CS) as hydrophilic segment and poly (L-lactic acid) (PLLA) as hydrophobic segment, was prepared through a protection-graft-de protection route. Chitosan is a polysaccharide...