Determining additional power losses in the electricity supply systems due to current's higher harmonics
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 1, Issue 8
Abstract
The paper reports results of research into the influence of higher harmonics of the power source voltage and the load current on power losses in an electric network. The relevance of this study is predetermined by the ever-increasing number of the electric energy pulse consumers, which leads to an increase in the number of higher harmonics at power supply systems. In turn, higher harmonics cause deterioration not only in the qualitative indicators for electricity, but a significant reduction in energy efficiency as well. The study that we conducted has shown that existing analytical dependences of a network's active resistance on the higher harmonics' frequencies are mutually exclusive, contradictory, and inaccurate because they do not take into consideration the geometrical characteristics of the network conductors. Based on the first-order Bessel equations, we have obtained refined analytical dependences of a network's active resistance on the higher harmonics' frequencies, taking into consideration the geometrical properties of wires. It has been established that in addition to an increase in the active resistance value due to the influence of a skin effect, higher harmonics predetermine additional losses caused by an increase in the root-mean-square current value. We present the dependence of additional power losses and efficiency factor in the electric network as a function of values for the load current harmonic distortions coefficient and the coefficients for harmonic distortions in a power source voltage. It was established that the network current higher harmonics, caused by the pulse load, lead to the bigger losses in the network than the higher harmonics from the power source. The results obtained in this study could be used in the calculation of energy losses in electric networks due to higher harmonics and while estimating economic efficiency when introducing filter compensating devices
Authors and Affiliations
Oleksandr Plakhtii, Volodymyr Nerubatskyi, Igor Ryshchenko, Olena Zinchenko, Sergiy Tykhonravov, Denys Hordiienko
Keywords
Related Articles
- EP ID EP666211
- DOI 10.15587/1729-4061.2019.155672
- Views 70
- Downloads 0
Development of a technology for the surface strengthening of barrel channels in the large-caliber artillery guns
<p>High temperatures and exposure to the chemical effect of powder gases that accompany artillery salvos actively destroy the surface layer of a barrel channel material. This disrupts the geometry of a barrel channel, th...
Study into the resonator structures with microprobe sensing elements
<p>By using methods of mathematical modeling and in the course of an experimental study we have investigated various types of microwave resonator measuring transducers with microprobe sensing elements of coaxial type. Su...
Calculation of stress concentrations in orthotropic cylindrical shells with holes on the basis of a variational method
<p>A variational numerical-analytical method (called the RVR method) is suggested for calculating the strength and stiffness of statically loaded non-thin orthotropic shell structures weakened by holes (stress concentrat...
Development of the method for the optimal management of occupational risks
<p>Within the framework of this research, we analyzed international normative and legal documents on risk management in the field of occupational health and safety and identified the following shortcomings:</p><p>– uncer...
Substantiation of quantitative composition of consignments in organizing aggregated shipments in containers
<p>The task of substantiating quantitative composition of cargo batches during formation of aggregated shipments in containers was studied.</p><p>As a result of the study, a general formulation of the problem of substant...