Determining Pull-Out Deformations by Means of an Online Photogrammetry Monitoring System
Journal Title: International Journal of Environment and Geoinformatics - Year 2015, Vol 2, Issue 1
Abstract
Chemical anchorages are applied in many engineering implementations, particularly strengthening of reinforced concrete structures. During strengthening procedure; chemical anchorages should be tested, since they supply to transfer the load between existing construction elements and newly added elements. Therefore; the study of the quality of chemical anchorages is an important issue in construction materials science. In this context; the most important experiment is to determine the pull-out loads of embedded anchorage reinforcement by applying axial loads. In this study; it is aimed to determine the displacements of steel reinforcements, embedded into concrete by using chemical anchorages, while applying axial pulling loads. In order to determine the displacements and load - deformation graphs; starting conditions and every 10 bar pressure applied conditions of the steel reinforcements were captured by the cameras. The obtained images were evaluated by using photogrammetric software. Based on the photogrammetric post-processing results, the load - deformation graphs were plotted and the loads at loss of adhesion were determined.
Authors and Affiliations
Emin Özgür Avşar
Keywords
Related Articles
- EP ID EP191932
- DOI -
- Views 100
- Downloads 0
A GIS-Based Study to Investigate Effect of Water Table Changes on DRASTIC Model: A Case Study of Kermanshah, Iran
Groundwater is considered as an important source of water supply in our world. Its contamination is of particular concern as it is a vital source of water for irrigation, drinking and industrial activities. To control an...
Connection between Ocean Acidification and Sound Propagation
Ocean Ambient Noise (OAN) results from both anthropogenic and natural sources. Varied noise sources are dominant in low (LFB: 10 to 500 Hz), medium (MFB: 500 Hz to 25 kHz) and high (HFB:>25 kHz) frequency bands. Mostly,...
3D Modelling of Geometric Triangle Construction Elements in Indoor Spaces: A Case Study for Tahir and Zühre Masjid
Tahir and Zühre Masjid, which is one of the works of Konya and Anatolian Seljuk Period, serve daily from the 13th century and draw attention with its interior architecture. The Masjid is seated on a square plan and cover...
Numerical Modelling of the 1995 Dinar Earthquake Effects on Hydrodynamic Regime of Egirdir Lake
The effect of earthquakes on closed and semi-closed water systems is a research topic that has been studied for many years. The lack of continuous measurement systems in closed and semi-closed water systems is insufficie...
Deformation Analysis by Geomatic and Geotechnical Methods in Highway Tunnels
In the highway transportation network, the tunnel has an important place. Tunnels are used to provide safe, comfortable and economical transportation in areas where topography is not available. In addition to the facilit...