Determining the Components of Foaming Agents That Can Have a Decisive Impact On Reducing the Absorption Proprieties of Rigid Polyurethane Foam Waste in Relation to Post-Foaming Waste
Journal Title: Safety & Fire Technology - Year 2018, Vol 50, Issue 2
Abstract
Aim: The aim of this publication is to experimentally identify the components of foaming agents that may have an impact on reducing the absorbency of rigid polyurethane foam waste in relation to post-foaming waste. This will allow to determine the mechanism behind the process which limits the sorbent’s effectiveness in rescue operations. Method: The research methods used were a modified Westinghouse test and a proprietary method of analysis of results taking into account the loss of mass following the evaporation of sorbate from the sorbent space. The tests used rigid polyurethane foam in the form of a solid powder. The tests examined selected combinations of ingredients that concentrate foaming agents, including sodium dodecyl sulphate, 2-butanol, 1-undecanol. Results and discussion: The dependence of the mass of sorbate solution absorbed in the pores of the sorbent as a function of dripping time and the maximum theoretical mass was determined for all tested systems by extrapolation of evaporation line to the OY axis. The determination of the influence of chosen ingredients of foaming agents on sorption was related to water sorption. To this end, the average maximum theoretical masses obtained for individual systems with different concentrations were compared and their compatibility with the average value obtained for water was examined. For this purpose, the comparative criterion was used at the level of significance a = 0.1. Conclusions: During the preliminary tests, the sorptivity of rigid polyurethane foam was noticeably lower in the presence of foaming agents, as compared to water. The tests clearly show that the factor responsible for the deterioration of pumice absorption properties is the presence of 1-undecanol in the foam concentrate, which is used as a foam stabiliser. This is of course synergistic with sodium dodecyl sulphate. While sodium dedecyl sulphate alone caused a small change in the absorbed mass of sorbate (about 2%), the addition of undecan-1-ol caused as much as 43% change. The addition of a solvent (2-butanol), in turn, caused only a slight change in absorptive properties, with the absorbency being slightly increased irrespective of the combination. The obtained results indicate that the factor responsible for the drop in sorptivity may be the low value of surface tension, which is typical of foaming agents solutions containing anionic surfactants. The decrease in surface tension causes a reduction in the capillary force and, as a result, facilitates the leakage of liquid from sorbent pores. The results indicate some limitations in the use of rigid polyurethane foam in rescue operations aimed at removing residuals of foaming agent solutions or water solutions containing traces of such agents.
Authors and Affiliations
Tomasz Węsierski, Oliwer Eszera
Keywords
Related Articles
- EP ID EP380198
- DOI 10.12845/bitp.50.2.2018.4;
- Views 45
- Downloads 0
Cyberspace Protection – the Challenge of Our Time?
Aim: The main purpose of these considerations is to identify the cyberspace protection issues in the light of the National Security Strategy of the Republic of Poland of 2014, Polish legislation in the field of cybercrim...
Theoretical Study of Fire Behaviour Concerned with the Prediction of Threats from Flashover, Backdraft and Ignition of Gases
Aim: This article describes events, which occur during the development of a fire inside buildings. Special attention is devoted to the development of backdraft and flashover. Additionally, the article identifies possibil...
Gaszenie płomienia dyfuzyjnego n-heptanu z wykorzystaniem fali uderzeniowej
Cel: Zbadanie skuteczności gaszenia płomienia dyfuzyjnego n-heptanu falą uderzeniową. Określenie możliwego mechanizmu gaszenia płomienia dyfuzyjnego falą uderzeniową na przykładzie płomienia n-heptanu С7Н16. Ustalenie mo...
The Electrostatic Properties of Plastic Pipes in relation to Ignition Risk – Testing, Assessment and Elimination
Aim: The article describes methods for eliminating the risk of an electrostatic discharge formation which could initiate an explosive atmosphere conflagration. Introduction: An explosive atmosphere, according to Directiv...
Long-Term Variability of Forest Fires in Selected 28 European Countries, Canada and the USA
Aim: The primary aim of this paper was to determine long-term variability in the number of forest fires and burnt forest area in selected 28 European countries, Canada and the USA and to assess the effectiveness of fir...