Determining the influence of parameters for gas-air flows on the thermal process of producing iron ore pellets
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 2, Issue 2
Abstract
<p>We present the results of the study on changes in temperature of gas-air flows at the outlets from calcination zones and recuperation zones of a conveyor-calcination plant. We determined the influence of these temperatures on other technological zones.</p><p>We showed that that the average volume temperatures of gas-air flows from calcination and recuperation zones are the exponential dependences on temperatures of gas-air flows above a layer of pellets in these zones. It was established that an increase in the speed of movement of calcination carts from 0.011 m/s to 0.06 m/s leads to a decrease in the average volume temperature of a heated gas-air flow by 1.7 times. An increase in the height of a pellet layer on calcination carts by 30 percent with constant gas permeability of this layer leads to an exponential decrease in the average volume temperature of a gas-air flow by 2.5 times at the outlet from the calcination and recuperation zones. The average volume temperatures of gas-air flows decrease at the outlet of a pellets layer up to three times at a change in the pressure by 20 % in the calcination zone and at the constant movement speed of calcination carts of 0.049 m/s, the height of a pellets layer of 450 mm and the porosity of a pellets layer of 0.45 m³/m.</p><p>We used a mathematical model to analyze a temperature mode of a gas-air flow at the outlet of the pellet calcination zone. The basis of the mathematical model was the relation between the inlets and outlets of technological zones of the plant by equations of gas dynamics and heat exchange and mass transfer.</p><p>The study made it possible to develop and present an automated control system for a smoke exhauster for average volume temperatures of gas-air flows at the outlet from the technological zones of calcination and recuperation of the plant. It is possible to use it under industrial conditions.</p>It improves thermal and gas-dynamic operation of technological zones of a conveyor calcination plant
Authors and Affiliations
Vyacheslav Lobov, Karina Lobova, Oleksandr Mytrofanov
Keywords
Related Articles
- EP ID EP666280
- DOI 10.15587/1729-4061.2019.163278
- Views 62
- Downloads 0
The objectified procedure and a technology for assessing the state of complex noise speech information protection
<p>White noise generators are typically applied for the systems of active interference in the design of systems for protecting verbal information. The level of speech information protection against leaking through acoust...
Improvement of the method of scenario analysis of functional requirements to an information system
<p>We have considered a task on improving the base method for scenario analysis of the functional requirements to an information system (IS). The results from studies of the methods for scenario analysis of the functiona...
Development of cooling systems on the basis of absorption water-ammonia refrigerating machines of low refrigeration capacity
<p>An analysis of the cycles of an absorption water-ammonia refrigerating machine (AWARM) is carried out in a wide range of operating parameters (temperature of the heating medium: 45...145 °C, outdoor temperature: 10......
Influence of the properties of blast furnace slag on cast iron heating at pulverized coal injection
<p>In the course of the studies at two industrial blast furnaces, we established a change in the characteristics of slag mode and cast iron heating, resulting from the transition to the pulverized coal fuel injection wit...
Development of an approach to ensure stability of the traction direct current system
<p>The result of applying the quantitative approach to the calculation of static stability of the traction power system helped us establish that when a train runs along an actual section there emerge zones with lack of s...