Deterministic Model of Elastic Rough Contact Taking into Account the Mutual Influence of Asperities
Journal Title: Journal of Materials and Engineering - Year 2023, Vol 1, Issue 3
Abstract
The analytical solution of the elastic contact problem for the bodies with rough surfaces is presented using a deterministic description of the surface roughness. Particularly, a model of the normal contact of a periodic system of axisymmetric punches of different heights with an elastic half-space is developed. The solution is obtained taking into account the real contact pressure distribution only under nearby ones, and considering the action of remote ones as the nominal pressure (the localization method). The effect of the shape of the punches and their spatial positions on the dependencies of the real contact area and the contact pressure distribution at the contact spots on the applied load are studied. The additional displacement function, which characterizes the effect of surface roughness on the relative approach of contacting bodies at the macrolevel, is also analysed.
Authors and Affiliations
Anastasiya Yakovenko, Irina Goryacheva
Keywords
Related Articles
- EP ID EP727416
- DOI 10.61552/JME.2023.03.003
- Views 30
- Downloads 0
QUALITY CONTROL IN THE MANUFACTURING INDUSTRY BASED ON THE APPLICATION OF COMPUTER VISION
Application of technologies based on information communication systems, internet networks, embedded systems, data storage in the cloud, computer vision, machine learning within manufacturing industry leads to a number of...
Triboinformatic Modeling of Wear in Total Knee Replacement Implants Using Machine Learning Algorithms
Pin-on-disk (PoD) tests, the most prevalent studies, are being carried out in order to evaluate tribological behaviour of different bearing materials. However, the comparison of results obtained from the PoD tests is ver...
Lubricant Droplets Can Bounce on Wetted Cylinders
In this work, the droplet bounce phenomenon of polyalphaolefin, olive oil, silicone oil, and paraffin oil on wetted cylinders was reported. With a uniform oil film with a thickness of 0.06 mm formed on the cylinder, typi...
Effect of Cross-Sectional Profile of Circular Dimples on Hydrodynamic Lubrication Characteristics of Thrust Bearings
The effects of three types of dimples with different internal structures on the fluid lubrication characteristics of thrust bearings were investigated. The load-carrying capacity and the frictional torque were measured....
Characteristics of Al6061-SiC-Al2O3 Surface Hybrid Composites Fabricated by Friction Stir Processing
Friction stir processing (FSP) has successfully evolved as an alternative technique of fabricating metal matrix composites. (MMC). FSP has been used positively to produce surface composite that offer good surface propert...