DETONOGRAPHY: MAKING OF MEDIEVAL MINE PRINT
Journal Title: UNKNOWN - Year 2018, Vol 33, Issue 1
Abstract
Using the force of explosive authors had made a print of the picture of Renaissance mine onto an aluminium plate. This technique is called Detonography. It has been introduced and developed by Evelin Rosenberg with a number of her colleagues/co-workers, based on “Munroe effect”. To determine the optimal parameters of blasting and supporting materials a large number of laboratory testing has been made on smaller samples.
Authors and Affiliations
Siniša Stanković, Matko Žbulj, Vinko Škrlec
Keywords
Related Articles
- EP ID EP30179
- DOI 10.17794/rgn.2018.1.1
- Views 161
- Downloads 3
NEW METHOD OF GAS DRAINAGE AS A SOLUTION OF DANGER PHENOMENA IN UNDERGROUND COAL MINES
The further development of coal mining in different countries and in India is connected with many problems. Very serious are emission of gas, sudden outbursts of gas and coal, mine fires, dustiness, spontaneous combustio...
MAPPING AND MODELLING FRACTURES USING GROUND PENETRATING RADAR FOR ORNAMENTAL STONE ASSESSMENT AND RECOVERY OPTIMIZATION: TWO CASE STUDIES
Rock mass is typically characterized by inherent fractures that cause natural blocks of rocks. Unplanned cutting of stone deposits in quarries may lead to over-producing waste (rock debris) or extracting unfit (fractured...
REDUCING THE ADVERSE EFFECTS OF BLASTING ON THE CAVE ECOSYSTEM NEAR THE FUTURE EXPLOITATION FIELD GRADUSA
The future exploitation field of technical-construction stone Gradusa is located in the area of Sunja municipality in Sisak-Moslavina County. Near Gradusa there is a cave that is part of the ecological network as a conse...
IMPACT OF GEOTHERMAL GRADIENT ON GROUND SOURCE HEAT PUMP SYSTEM MODELING
Undisturbed ground temperature is one of the most crucial thermogeological parameters needed for shallow geothermal resources assessment. Energy considered to be geothermal is energy stored in the ground at depths where...
PROBLEMI U SUSTAVU TUBING/PAKER
U naftnim i plinskim bušotinama koje su u obradi ili proizvodnji u sustavu tubing/paker treba rješavati brojne probleme. Promjene temperatura i tlakova koje se zbivaju tijekom različitih operacija obično rezultiraju prom...