Development and investigation of the reduced mathematical model of the process of baking carbon products
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 1, Issue 8
Abstract
<p class="ParaAttribute2">The development of optimal control of the process of baking carbon products involves consideration of the influence of characteristic zones of the furnace and uniformity of the temperature field of workpieces. This statement suggests the development of a distributed-parameter mathematical model of the furnace. It is known that the calculation time of such models is quite large, and then their application in real time is impossible. According to the above, for further development of the optimal control system of the baking process, there is a need to reduce the full mathematical model providing the necessary calculation time.</p><p class="ParaAttribute2">The reduced mathematical model of the baking process, which differs from the known models in shorter calculation time was developed and investigated in compliance with accuracy requirements.</p><p class="ParaAttribute2">It is found that for cases of using n>15 first basis vectors, the restriction on the permissible error of approximation of the values of Fourier coefficients is fulfilled. The possibility of choosing the optimal structure of identification models determines the possibility of obtaining temperature images of the reduced mathematical model with the necessary accuracy.</p><p class="ParaAttribute2">The results obtained allow flexible selection of the reduced mathematical model in accordance with the technical capabilities of computing equipment.</p><p class="ParaAttribute2">Given that in the process of baking carbon products, the defining temperatures are workpiece temperatures, only control points of workpieces were selected for the quality study of reduced models.</p><p class="ParaAttribute2">Since the process of baking carbon products consists of three main stages, three reduced mathematical models of these stages were implemented for adequate modeling of such a process.</p>The study of the accuracy of reduced models included comparisons of temperature values calculated by the reduced model with temperatures calculated by the initial model, which in this case was considered as a generator of experimental data
Authors and Affiliations
Oleksii Zhuchenko, Anton Korotynskyi
Keywords
Related Articles
- EP ID EP666218
- DOI 10.15587/1729-4061.2019.154840
- Views 66
- Downloads 0
Effect of blanching and treatment with a salt solution on the biological value of broccoli
<p class="a">We studied and analyzed the components of the biological value of broccoli, the variety of Parthenon, cultivated in the regions of Ukraine. The research results are reported, the changes in the content of as...
Managing a greenhouse complex using the synergetic approach and neural networks
<p>The paper considers the use of artificial neural networks in order to synthesize intelligent systems governed by a synergetic control law. It has been shown that so far all the studied objects and, therefore, control...
Construction of algorithms to automatically determine individual indicators when assessing the shape quality of cross-wound packages
<p>The paper addresses issues related to the selection of individual indicators to estimate the shape quality of cross-wound packages, as well as the construction of algorithms to determine them automatically.</p><p>We h...
Assessment of efficiency of drying grain materials using microwave heating
<p>We present results of experimental work on studying the drying of a dense layer of grain using microwave heating. We investigated a series of techniques to supply heat to grain to assess energy efficiency of a microwa...
Generalization of one algorithm for constructing recurrent splines
<p class="a">We have analyzed two algorithms, close in composition, for constructing a smoothing spline, which imply a change only in the last link of the spline when new experimental data arrive. The main feature of the...