Development and investigation of UAV for aerial surveying
Journal Title: Геодезія, картографія і аерофотознімання - Year 2018, Vol 87, Issue 1
Abstract
Aim. To develop an UAV for topographical aerial surveying goals, to explore its features, and comply with assigned tasks. Methodology. Scientists of the Institute of Geodesy in National University Lviv Polytechnic and manufacturers of Abris Design Group consistently designed and studied several models of UAVs, in order to create a perfect model, to make it possible to organize aerial surveying for topographical purposes. As a result of previous experimental work, technical requirements for the creation of UAVs were defined. It is for these requirements the latest model UAV Arrow was constructed. To test the model of the aircraft, a technological scheme of testing has been developed in order to identify design deficiencies and obtain appropriate certified aerial photos and further to create large-scale topographical plans and orthophotomaps. Results. As a result of pilot works with the use of UAV Arrow, possible problems related to the UAV launch were identified and means to eliminate them were given. As a result of the testing aerial surveying from the Arrow UAV, 132 images from 7 routes were obtained. In order to assess the accuracy of determining the coordinates of points of the locality, 57 points were marked. The coordinates of control points were determined during the execution of the horizontal and vertical tie-in by GPS-receivers Trimble R7 in RTK mode. After the creation of orthophotomaps, in the Digitals software package, using these materials the coordinates of the above-mentioned control points were measured and the MSE were founded. MSE for planned coordinates were: 0,19 m,0,11 m, which confirms the ability to create plans at a scale of 1:2000. Scientific novelty. The UAV Arrow was designed and investigated, which application allowed performing aerial surveying and processing of large-scale orthophotomaps with the required accuracy. Practical significance. The possibility of using materials obtained from the results of aerial surveying with UAV Arrow to process orthophotomaps at a scale of 1:2000 was prove
Authors and Affiliations
V. M. Hlotov, А. V. Hunina, V. Kolesnichenko, O. Prokhorchuk, M. Yurkiv
Keywords
Related Articles
- EP ID EP483837
- DOI 10.23939/istcgcap2018.01.048
- Views 131
- Downloads 0
Application of mathematical morphology methods in terms of erosive processes research using aerial photography materials
Object of study. Planned distribution establishment of erosive “spots” of the agricultural lands is based on the processing of binary images of aerial photographic materials using morphological and planimetric methods of...
Determination of location of the historical objects using photogrammetric methods and methods of non-destructive ground research
The aim of the research was to determine the territory of the mass graves near Ralivka village (Lviv region) using archival data and to display them on modern maps. To define the place of mass executions and burials fro...
Construction of the model determine the discount rate by market extraction
Purpose. The actual problem is the determination of the discount rate for cadastral valuation of real estate settlements. Discount rate – the most difficult variable (characteristic) that is needed to determine the marke...
Polish active geodetic network as a multi-functional nationwide navigation and positioning system
The aim. The aim of the work is the research of the possibilities of using the real time in geodetic satellite measurements, the support system of Ground-Based Augmentation System (GBAS) type [Prasad and Ruggieri 2005, R...
Construction of the normal equations matrix for modeling of local gravitational field
We consider the method of constructing the local gravity field using nonorthogonal basic functions, which are solution of the Laplace equation in spherical cap or spherical segment. This approach involves using of associ...