Development of adaptive fuzzy-logic device for control under conditions of parametric non-stationarity
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 1, Issue 2
Abstract
<p>We studied an automatic control system with the fuzzy adaptive device for setting parameters of the PI-controller under conditions of non-stationarity of parameters of the control object’s model. The relevance of present research is in the application of more complex control structures, when it is necessary to achieve small deviations in quality control parameters under conditions of change in the parameters of control model. In contrast to the common circuit when the fuzzy controller is directly included into the main control channel, in the present article we consider a circuit with the fuzzy controller as a unit of adaptation of PI-controller’s parameters. Coefficients of the standard controller are adjusted to the changes of object in real time on the basis of rule base for the fuzzy adaptive device and two input signals: an inconsistency signal and derivative from the inconsistency signal. Mathematical modeling of the designed system was performed.</p><p>We compared a single-circuit system at constant settings of the controller and the adaptive system for different states of an object that are determined by variable parameters of its model. Parameters of operation quality of both systems were calculated. Application of the fuzzy adaptive device warrants the required stability factor. In this case, high quality of operation of an automatic control system under conditions of parametric non-stationarity of the studied object was preserved. </p>
Authors and Affiliations
Oleg Shtifzon, Pavlo Novikov, Taras Bahan
Keywords
Related Articles
- EP ID EP527731
- DOI 10.15587/1729-4061.2018.121749
- Views 131
- Downloads 0
Design of parallel link mobile robot manipulator mechanisms based on function-oriented element base
<p>To create effective mobile robot manipulators, a function-oriented element base is proposed. Element base selection is based on the analysis of schematics of mobile robot manipulators. It is substantiated that the eff...
Determining the influence of carbon black in oil on the wear resistance of elements in the tribological system "steel – oil – bronze"
<p>The results of experimental research into the influence of the concentration of carbon black in industrial oil I-30А and on wear resistance of the tribological system "steel-oil-bronze" are presented. It is assumed th...
Analysis of ballistic aspects in the combined method for removing space objects from the nearEarth orbits
<p>We have considered one of the ways to clean the near-Earth orbits from space debris implying the removal of large-size objects, which represent a danger to space navigation and ecology of near-earth space, in the dens...
Study of the influence of oxidizing parameters on the composition and morphology of Al2O3•CoOx coatings on AL25 alloy
<p>The influence of operating parameters of plasma-electrolytic oxidation in diphosphate cobalt-containing electrolyte on the process of formation of oxide coatings on alumosilicon alloy AL25 (GOST 1583) was studied. It...
Development of electricarc pseudoalloy coatings for the strengthening of copper walls of molds
<p>On the basis of the requirements for protective coatings of molds, the materials of pseudoalloys were determined for applying coatings from two wires. One of the wires is copper, which provides maintaining a sufficien...