Development of devices and systems of growth of gallium arsenide ingots for micro, nano electronics and photovoltaics
Journal Title: Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування - Year 2013, Vol 0, Issue 54
Abstract
Gallium arsenide is a perspective semiconductor, the need for which is constantly increasing. This is associated with the development of electronic components operating in excess of the high frequency range and development of terrestrial photovoltaics based on gallium arsenide solar cells. Increase in diameter of grown ingots leads to a deterioration in their performance, which is caused by the imperfection of growing technology. The paper presents the results of the development of systems and devices which help to improve existing technology to produce GaAs ingots and wafers with a diameter of 100 mm with the best technical parameters. Developed a system to manage growing GaAs ingot. As a sensor of diameter ingot it uses a weighting method provides a measurement error in the process of growing ± 1,0 mm. The system allows to grow GaAs ingots with an error of ± 2 mm. For the formation of temperature gradients developed thermal unit, which provides a gradient of 51 .. 53 K cm in growing of ingots with diameter of 100 mm. For adjusting the process parameters were developed measuring device of the internal stresses that are generated in the ingot during the growth of the GaAs ingot. Presented in paper technical solutions provided a silicon ingot with a diameter of 100 mm. with mobility, cm2 V-1 s-1 - 2500 ÷ 3500, the charge carrier density, cm-3 - 5x1017 ÷ 5x1018; dislocation density, cm-2 - to 8x104.
Authors and Affiliations
A. Oksanich, S. Pritchin, V. Terban
Automatic EEG eye movement artifacts removal using Independent Component Analysis
Background. Eye movement artifacts contained in EEG recordings hamper a lot the automatic processing and analysis of EEG signal. Therefore, the removal of such artifacts is important stage for any further signal processi...
Increase of data-rate a Rake-receiver
Investigation method to increase of data-rate in communication networks with the code demultiplexing by the method of increasing modulation positions and introduction of additional of receiver.
Method of analogue signal sampling on the basis of lowering dimension non-expansive compact uniformly continuous mapping
The work purpose is creation of the method for analogue signal digitization on the basis of lowering dimension non-expansive compact uniformly continuous mapping operating in compact metric spaces for computer systems of...
Optimization criterial of model of the radio electronic device
The features of designing of radio electronic devices structural - optimized by method are considered. The basic functional - constructive characteristics of the device are submitted as system criterial of the equations,...
Mathematical model of instantaneous frequency measuring process of radioemission phasemeasuring sources by interference type devices
Formulation of the problem in general. The question of determination of the instantaneous significance of the radio emission sources’ carrier frequency in the conditions of high aprior uncertainty of signal parameters an...