Development of methods for the analysis of functional requirements to an information system for consistency and illogicality
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 1, Issue 2
Abstract
<p>The order of work aimed at analyzing the requirements is considered, taking into account application of the service approach to development of IS, models and methods of development of representations of functional requirements to IS at the knowledge level. It was proposed to perform work on IS requirements analysis in parallel to the work on the requirements development. Such an organization of work makes it possible to reduce the time required to perform work on the IS macro design.</p><p>Methods of analysis of separate frames and relations between frames and between frames and interfaces of representations of functional requirements to IS at the knowledge level were developed. The essence of the methods lies in comparison of frames and relations, used for description of concepts and terms in a subject area. These methods make it possible to detect inconsistencies, caused by attempts to describe the same object in a subject area in different ways.</p><p>The indicator of illogicality of the stated functional requirement and the method of detection of illogical functional requirements was developed. The essence of this method lies in identification of separate branches of the frame hierarchy (ontological points) that are present in representation of only one functional requirement to IS. Such requirement is not related to other functional requirements to IS and is considered to be illogical. This method makes it possible to assess a degree of illogicality of each functional requirement, based on which it is possible to make a decision about the feasibility of IS development.</p><p>The research contains an example of testing the developed methods in the analysis of functional requirements to the project related to the functional labor safety module. </p>
Authors and Affiliations
Maksym Ievlanov, Nataliya Vasiltcova, Iryna Panforova
Keywords
Related Articles
- EP ID EP527728
- DOI 10.15587/1729-4061.2018.121849
- Views 126
- Downloads 0
Development and study of hydromechanical method for cleaning sewage collectors from contamination
<p>In connection with bad state of existing sewer headers, there is a great need for quick and high-quality cleaning for their further operation. To extend service life of distribution systems, new technologies for their...
Development of a model for the integrated management of the international delivery chains formation
<p>We propose a model for the formation of international logistics chains based on an integrated multicriterial analysis of potential cargo transportation routes and delivery cost. The application of the systemic approac...
Development of a vacuum-evaporative thermotransformer for the cooling system at a nuclear power plant
<p>The study addresses the development of a method for the optimal design of vacuum-evaporative heat pump plants (HPP) for a cooling system of technological equipment of the second circuit at a nuclear power plant (NPP)...
Development of technology of superconducting multilevel wiring in speed GaAs structures of LSI/VLSI
<p class="Abstract">Technological aspects of the use of superconducting materials are considered and the possibility of making targets for magnetron deposition of films for the formation of cryoconductive wiring in GaAs-...
Establishing the dependence of pollutant concentration on operational conditions at facilities of an oilandgas complex
<p>Environmental impact of gas burning parameters during operation of the gas pumping units of compressor stationswas studied. Simulation of the NO<sub>2</sub>, NO and CO dispersion zone at the excess air coefficients of...