Development of principles and methods for calculation of direct current hybrid contactors
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 2, Issue 5
Abstract
<p>The study showed that we can implement the principle of current control of the main circuit of a hybrid DC contactor by introduction of a small-size transformer of current into it. It has two primary windings, the first of which is connected to the first pole in succession with the main contact, the second one ‒ in series with a semiconductor switch, which shunts this contact in opposition to the first, and one secondary power supply.</p><p>The study determined peculiarities of the processes of current flowing from the circuit of the main contacts, the commutation of a current transformer, the charging of a commutation condenser for locking of a semiconductor switch. The study showed that a magnetic wire conductor of a transformer is saturated and a control circuit is deenergized in a switched-on state. When a contactor is switched off, the charge of a commutation condenser capacitor goes due to a direct current under an action of EMF, which occurs on the secondary winding of a transformer during its re-magnetization in the opposite direction by current flowing in a shunting circuit. At the same time, at the given values of a cross section of a magnetic conductor and capacity of a condenser, a voltage level to which it is charged, does not depend on the number of turns of the secondary winding, but it is proportional to a square root of commutated current. The time of its charge under the same conditions is proportional to the number of turns of the secondary winding. This makes it possible to approach reasonably definition of parameters of elements that provide reliable locking of semiconductor switchers.</p>The study showed that the proposed hybrid contactors, due to introduction of circuit current control, have properties that enhance their competitiveness compared to the existing ones. Specifically, they increased reliability, they do not need a power supply from an additional power source, they exclude standard drivers, they show minimized energy consumption. Thus, the application aspect of a use of the obtained scientific result is the possibility of creation of competitive reliable hybrid DC contactors for voltage up to 1,000 V and currents of 100‒630 A
Authors and Affiliations
Anatoly Soskov, Nataliya Sabalaeva, Yana Forkun, Marina Glebova
Keywords
Related Articles
- EP ID EP527882
- DOI 10.15587/1729-4061.2018.128495
- Views 61
- Downloads 0
Modeling an intelligent system for the estimation of technical state of construction structures
<p>The study investigates issues related to modeling and development of intelligent systems for estimation of the technical state of building constructions. The study considers mathematical bases of modeling of an estima...
Determining the characteristics of diffracted sea waves of finite amplitude around a vessel in considerable shallow waters
<p>Vessels at shallow-water outer anchorage are exposed to a complex system of waves. This system results from the diffraction of sea-incident waves against a ship. When entering shallow waters, three-dimensional waves t...
Procedure for the synthesis of models of electrotechnical complexes
<p>A procedure for developing visual mathematical models of multichannel electrotechnical complexes which reduces time of synthesis of mathematical models and error likelihood was developed. The procedure includes two st...
Substantiation of the interaction mechanism between the lipo- and glucoproteids of rye-wheat flour and nanoparticles of the food additive «Magnetofооd»
<p>The mechanism of interaction between nanoparticles (NP) from the polyfunctional food additive «Magnetofood» and functional groups of complex proteins of rye-wheat flour is established. NP of the food additive «Magneto...
Studying the emissions from enterprises in the breadmaking industry in order to use them as additives to animal feed products
<p>We have investigated the concentration, physical properties and chemical composition of dust formed in the equipment at enterprises in the bread-making industry, depending on the character of production and a place of...