Development of technology of superconducting multilevel wiring in speed GaAs structures of LSI/VLSI
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 1, Issue 5
Abstract
<p class="Abstract">Technological aspects of the use of superconducting materials are considered and the possibility of making targets for magnetron deposition of films for the formation of cryoconductive wiring in GaAs-based LSI-structures is shown. The technological methods and regimes are determined and high-performance technology of cryoalloys making based on Al, Nb, V with Si, Ge and rare-earth metal admixtures and magnetron formation of superconducting films from aluminum, niobium and vanadium alloys are developed. In particular, technological regimes (ion current, accelerating voltage, deposition rate, plasma composition, uniformity of components per silicon substrate diameter) have been established, which provide a thickness of films at the level of 0.6-1 μm. Insignificant thermomechanical stresses (about 1 kg/cm<sup>2</sup>) and small grain size (~ 10 nm) will allow for excellent adhesion of deposited films and formation of a topological pattern of submicron sizes using photolithography.</p><p class="Abstract">The parameters and characteristics of the Schottky field GaAs transistors on homo- and heterostructures (Schottky barrier height 0.75-0.8 eV, non-ideality factor 1.2-2, breakdown voltage of Schottky barrier 15-30 V) are explored and methods for increasing the speed of the LSI-structures are defined. It is shown that increasing the speed of LSI/VLSI-structures on gallium arsenide is achieved by using thermostable cryomaterials as gate electrodes, conductors and contacts of source-drain regions of the Schottky field-effect transistors.</p>
Authors and Affiliations
Stepan Novosiadlyi, Myhaylo Kotyk, Bogdan Dzundza, Volodymyr Gryga, Sviatoslav Novosiadlyi
Keywords
Related Articles
- EP ID EP527765
- DOI 10.15587/1729-4061.2018.123143
- Views 65
- Downloads 0
Development of the method for structural-parametric optimization in order to improve the efficiency of transition processes in periodic systems
<p>In order to get the most out of the enterprise’s operational processes, the operational processes of functional systems are optimized. However, in the process of optimization, controlled systems over a significant amo...
Electroextraction of heavy metals from wastewater for the protection of natural water bodies from pollution
<p>The most promising methods of eluates recycling are electrolysis and electrodialysis. It is possible to obtain metals and purified regeneration solutions for repeated regeneration in case of application of electrochem...
Results of experimental studies into the dynamics of mass-exchange processes during synthesis of propane hydrate
<p>Design diagram of experimental setup for studying the mass exchange processes occurring during formation of gas hydrates was presented. A procedure of performing studies and the use of equipment for conducting experim...
Development of a promising system for diagnosing the frogs of railroad switches using the transverse profile measurement method
<p>We have developed a system for diagnosing the frogs of railroad switches, based on the application of modern microcontrollers of the type ESP with high technical characteristics and the simultaneous use of the informa...
Development of the method for rapid detection of hazardous atmospheric pollution of cities with the help of recurrence measures
The method for rapid detection of hazardous pollution of the atmosphere of cities, which is based on dynamic measures of recurrence (repeatability) of the states of the pollution concentration vector, was developed. The...