Development of the method of exposure control of grain drying in hightemperature dryers
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 3, Issue 3
Abstract
<p>When studying the kinetics of high-temperature wheat drying, it is found that at the end of the constant drying period, there is a sharp increase in the grain heating temperature. The temperature jump occurs due to the grain surface dehydration, when the average relative moisture is close to standard and makes 15...16 %. Based on this regularity, the method of exposure control of grain drying in high-temperature dryers without using continuous-flow moisture meters is developed.</p><p>The method is based on simultaneous control of the material heating temperature by temperature sensors over the entire length of the drying chamber. The measured values from the temperature sensors are transmitted to the microcontroller in order to periodically approximate them with the cubic polynomial and find the derivative of the second-order function.</p><p>The microcontroller is programmed to determine the second-order critical point – the location of the grain, having standard moisture. The obtained result is compared with the maximum length of the grain path along the drying chamber in order to subsequently influence the discharger performance.</p><p>The developed method of exposure control of grain drying in high-temperature dryers provides the necessary time for the temperature effect of the drying agent on the grain, process quality and reduction of energy consumption for grain drying. On the basis of this method, the drying process without the use of expensive continuous-flow grain moisture meters operating with a high measurement error is automated.</p>
Authors and Affiliations
Mikhail Volkhonov, Igor Jabbarov, Valery Soldatov, Ivan Smirnov
Keywords
Related Articles
- EP ID EP527967
- DOI 10.15587/1729-4061.2018.133607
- Views 45
- Downloads 0
Development of test operations of different duration in terms of input for the verification of efficiency formula
<p>Determining an indicator for the estimation of effectiveness of system operations is an important stage for optimization of technological processes of any enterprise. This step predetermines the established mode of fu...
Development of artificial neural network for determining the components of errors when measuring angles using a goniometric software-hardware complex
<p>We have developed an artificial neural network to determine the components of error in measuring the angles by automated goniometric systems whose change over time is a non-stationary random process. There are known t...
Numerical study of flows in axial compressors of aircraft gas-turbine engines
<p>Design and adjustment of compressors at modern gas-turbine engines are based on the wide use of numerical analysis methods of a various level of complexity. Such approaches make it possible to analyze the alignment of...
Development оf combined method for predicting the process of the occurrence of emergencies of natural character
<p>We developed a combined method for forecasting of the process of occurrence of emergency situations of a natural character. In contrast with other methods, it makes it possible to perform a complex forecasting of emer...
Aspects of program control over technological innovations with consideration of risks
<p>The dynamic system of control of technological innovations is considered. Its dynamics is described by a vector linear discrete recurrent ratio and influenced by control parameters (controls) and an uncontrollable par...