Development of the technique for improving the structure of a magnetic field in the aperture of a quadrupole electromagnet with a superconducting winding
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 5, Issue 5
Abstract
<p>It is of practical interest to construct models for a magnetic field of the quadrupole electromagnet that would make it possible to adjust the medium-integral coefficients of magnetic flux density by changing the geometrical parameters of magnet design. The aim of this work is to develop a method for the optimization of a quadrupole electromagnet's structure with a superconducting winding based on the criterion for a minimum of magnitudes of the non-quadrupole medium-integral coefficients of magnetic flux density in the aperture. Practical application of the technique makes it possible to optimize the design of a quadrupole electromagnet to minimize coefficients of magnetic flux density, medium-integral in length, based on the calculation of geometrical parameters for the yoke and winding. The derived analytical expressions to calculate the minimized magnetic flux density coefficients, medium-integral in length, generated inside the aperture of a quadrupole electromagnet, are based on their proportionality to the contributions from the current winding and the dependence on its position relative to the yoke. The relationships between the coefficients of magnetic flux density, medium-integral in length, and design parameters, established empirically, underlie the procedure for practical application of the technique for improving the uniformity of a gradient of magnetic flux density of a quadrupole electromagnet. The expressions obtained allow the calculation of the required correction of geometrical parameters in the already existing structure in order to optimize magnetic field inside the aperture of quadrupole electromagnets based on the assigned medium-integral coefficients.</p>The paper reports results of the optimization of design of a magnetoactive part of the triplet of quadrupole electromagnets at an accelerator complex for the project NICA. Optimization was carried out based on the proposed technique with the minimization to a level of 10<sup>-5</sup> of the non-quadrupole medium-integral coefficients for the transverse components of magnetic flux density generated in the aperture of an electromagnet with a superconducting winding
Authors and Affiliations
Andriy Getman
Keywords
Related Articles
- EP ID EP528173
- DOI 10.15587/1729-4061.2018.142163
- Views 82
- Downloads 0
Study of the influence of electric transmission parameters on the efficiency of freight rolling stock of direct current
<p>The negative impact of non-uniformity of current distribution in the power circuit of a freight direct current rolling stock on its operation efficiency was experimentally established. In contrast to existing approach...
Effect of banana powder and butter on the formation of the crystalline phase of sugar fondant
<p>Taking into consideration modern requirements to technological characteristics of decorative semi-finished products, micronutrient composition, we developed the formulation for the innovative confectionery semi-finish...
Determining the regions for efficient use of electrojet lowthrust engines
<p>This work addresses the issues on determining the optimal regions for using propulsion system for spacecraft at low near-Earth orbits. An analysis of spacecraft launches over the past 5 years has been performed. The r...
Analysis of properties of epoxy compositions that operate in contact with water and oil products
<p>We modified epoxy resin-based polymer solutions to increase durability in aggressive environments and to reduce costs. We achieved the objective via filling them with the multifractional mineral frame and modification...
Development of a method for structural optimization of a neural network based on the criterion of resource utilization efficiency
<p>At present, mathematical models in the form of artificial neural networks (ANNs) are widely used to solve problems on approximation. Application of this technology involves a two-stage approach that implies determinin...