Development of Woven Spacer Fabrics Based on Steel Wires and Carbon Rovings
Journal Title: Fibres and Textiles in Eastern Europe - Year 2017, Vol 25, Issue 1
Abstract
Woven spacer fabrics are used as reinforcing materials for fiber-reinforced plastics. These fabrics consist of mostly pliable textile fibers, which still require defined rigidity for different crash applications. In this regard, multi-material woven spacer fabrics present a promising approach. This paper presents the development of multi-material woven spacer fabrics using steel wire and carbon rovings. For the development of such woven spacer fabrics, a systematic structure realization based on the weave pattern was performed. Selected structures were produced on a modified weaving machine.
Authors and Affiliations
Moniruddoza Ashir, Cornelia Sennewald , Gerald Hoffmann, Chokr Cherif
Keywords
Related Articles
- EP ID EP199555
- DOI 10.5604/01.3001.0010.1710
- Views 75
- Downloads 0
Directions of the Finishing of Fibres and Textile Development
The development of textile finishing techniques and technologies outside of reports in world-wide publications is also very visible at subsequent fairs. At international fairs, such as ITMA, ATMA and FESPA, machine, equi...
Subjective Interpretation and Objective Evaluation of Blackout Fabric’s Barrier Properties
This work presents an experimental approach and the results of preliminary measurements of the light barrier properties of shading fabrics (blackouts). Based on literature it can be stated that there is a lack of require...
Modifying the Shape of Blades of a Flexible Reed in a Vibration Beat-up Mechanism – Theoretical Investigation
The beat-up mechanism of a loom with exciters for vibrating motion of the reed is presented . With the placing of exciters at regular distances across the width of the reed, certain differences can be observed in the amp...
Optimization of the Thickness of Layers within a Calender Shaft
Calenders are widely used in the textile industry to finish flat textile products. The main goal of the paper was to analyze the thermal phenomena within a calender shaft heated by oil and optimize the material thickness...
Optimisation of Pad Thicknesses in Ironing Machines During Coupled Heat and Mass Transport
The comparative advantage and intra-industry trade of five countries: Czech Republic, Hungary, Poland, Romania and Turkey, are analyzed in the global textile and clothing markets by employing Balassa’s revealed comparati...