Differential Pulse Polarographic Behavior and Quantification of the Flucloxacillin in Pure and Pharmaceutical Dosage Forms Using a Static Mercury Drop Electrode
Journal Title: JOURNAL OF ADVANCES IN CHEMISTRY - Year 2018, Vol 15, Issue 2
Abstract
Differential pulse polarographic analysis (DPPA) by using static mercury drop electrode (SMDE) for quantification of flucloxacillin (FLUX) in pure and pharmaceutical dosage forms was studied. The optimum conditions for the polarographic signal were determined and a study was made of the different parameters affecting the electrochemical process. The best definition of the analytical signals was found in Britton–Robinson buffer (0.06 M) at pH 4.0 . Under the optimum conditions, liner calibration graph, Ip=f(CFLUX) was obtained in the concentration ranges of 0.1 mM (0.0494 ?g.mL-1) to 26 mM (12.8414 ?g.mL-1) at -940 to -1000 mV (versus Ag/AgCl) with relative standard deviations (RSD) did not exceed 2.4% for the concentrations of FLUX (0.0494 ?g.mL-1). Regression analysis showed a good correlation coefficient (R2=9998) between Ip and concentration over the mentioned range. The limit of detection (LOD) and the limit of quantification (LOQ) were to be 0.0040 and 0.0120 ?g.mL-1, respectively. The proposed method was validated for linearity, precision and accuracy, repeatability, sensitivity (LOD and LOQ), robustness and specificity. The developed method is applicable for the determination of FLUX in pure and different dosage forms in presence a same amount of amoxicillin (AMOX) with average recovery of 99.4 to 102.2 % and the results are in good agreement with those obtained by the HPLC reference method.
Authors and Affiliations
Abdul Aziz Ramadan, Hasna Mandil, Reham Abu Saleh
Structural Study of Microporous Xerogels Prepared by Polycondensation of Pyrogallol with Formaldehyde
Microporous xerogels were prepared by polycondensation of pyrogallol with formaldehyde catalyzed by perchloric acid in aqueous medium. The samples were characterized by FTIR absorption spectra. The micro-porosity and the...
Low Error Rate Data Transmission in Cognitive Radio Networks
Cognitive Radio (CR) has become a hopeful technology to enhance the spectrum utilization through spectrum sharing between licensed user (primary user) and unlicensed user (secondary user). An vital rule manda...
ANALYSIS AND OPTIMIZATION OF FRICTION WELDING PARAMETERS FOR AA6061-AA2014 DISSIMILAR JOINTS
Friction welding is a solid state welding used owing to its properties such as low heat input, high production efficiency and environment friendliness. Materials which aredifficult towelded by fusion welding processes ca...
Enhanced Antimicrobial activities of Hybrid ZnMgAlO nanocomposite by soft chemical method
In the present investigation, ZnMgAlO nanoparticles were prepared by soft chemical method. The synthesized NPs were analyzed by XRD and SEM EDAX. ZnMgAlO crystal structure was confirmed through powder XRD technique as...
Fourth Atom-Bond Connectivity Index of an Infinite Class of Nanostar Dendrimer D3[n]
The atom-bond connectivity (ABC) index of a graph G is a connectivity topological index was defined as  where dv denotes the degree of vertex v of G. In 2010, M. Ghorbani et. al. introduced a new version of atom-bond co...